feat(phy): add a config for pll track feature

components/esp_phy/src/phy_common.c

@@ -26,6 +26,7 @@ static const char* TAG = "phy_comm";
 
 static volatile uint16_t s_phy_modem_flag = 0;
 
+#if !CONFIG_ESP_PHY_DISABLE_PLL_TRACK
 extern void phy_param_track_tot(bool en_wifi, bool en_ble_154);
 static esp_timer_handle_t phy_track_pll_timer;
 #if CONFIG_ESP_WIFI_ENABLED
@@ -34,8 +35,9 @@ static volatile int64_t s_wifi_prev_timestamp;
 #if CONFIG_IEEE802154_ENABLED || CONFIG_BT_ENABLED
 static volatile int64_t s_bt_154_prev_timestamp;
 #endif
-#define PHY_TRACK_PLL_PERIOD_IN_US 1000000
+#define PHY_TRACK_PLL_PERIOD_IN_US (CONFIG_ESP_PHY_PLL_TRACK_PERIOD_MS * 1000)
 static void phy_track_pll_internal(void);
+#endif
 
 static esp_phy_ant_gpio_config_t s_phy_ant_gpio_config = { 0 };
 static esp_phy_ant_config_t s_phy_ant_config = { 0 };
@@ -47,6 +49,7 @@ bool phy_enabled_modem_contains(esp_phy_modem_t modem)
 }
 #endif
 
+#if !CONFIG_ESP_PHY_DISABLE_PLL_TRACK
 void phy_track_pll(void)
 {
     // Light sleep scenario: enabling and disabling PHY frequently, the timer will not get triggered.
@@ -121,6 +124,7 @@ void phy_track_pll_deinit(void)
     ESP_ERROR_CHECK(esp_timer_stop(phy_track_pll_timer));
     ESP_ERROR_CHECK(esp_timer_delete(phy_track_pll_timer));
 }
+#endif
 
 void phy_set_modem_flag(esp_phy_modem_t modem)
 {

components/esp_phy/src/phy_init.c

@@ -329,7 +329,7 @@ void esp_phy_enable(esp_phy_modem_t modem)
 #endif
 
 // ESP32 will track pll in the wifi/BT modem interrupt handler.
-#if !CONFIG_IDF_TARGET_ESP32
+#if !CONFIG_IDF_TARGET_ESP32 && !CONFIG_ESP_PHY_DISABLE_PLL_TRACK
         phy_track_pll_init();
 #endif
 
@@ -340,7 +340,7 @@ void esp_phy_enable(esp_phy_modem_t modem)
 
     }
     phy_set_modem_flag(modem);
-#if !CONFIG_IDF_TARGET_ESP32
+#if !CONFIG_IDF_TARGET_ESP32 && !CONFIG_ESP_PHY_DISABLE_PLL_TRACK
     // Immediately track pll when phy enabled.
     phy_track_pll();
 #endif
@@ -360,7 +360,7 @@ void esp_phy_disable(esp_phy_modem_t modem)
     phy_clr_modem_flag(modem);
     if (phy_get_modem_flag() == 0) {
 // ESP32 will track pll in the wifi/BT modem interrupt handler.
-#if !CONFIG_IDF_TARGET_ESP32
+#if !CONFIG_IDF_TARGET_ESP32 && !CONFIG_ESP_PHY_DISABLE_PLL_TRACK
         phy_track_pll_deinit();
 #endif
 #if SOC_PM_MODEM_RETENTION_BY_BACKUPDMA

components/esp_phy/src/phy_init_esp32hxx.c

@@ -113,11 +113,15 @@ void esp_phy_enable(esp_phy_modem_t modem)
         } else {
             phy_wakeup_init();
         }
+#if !CONFIG_ESP_PHY_DISABLE_PLL_TRACK
         phy_track_pll_init();
+#endif
     }
     phy_set_modem_flag(modem);
     // Immediately track pll when phy enabled.
+#if !CONFIG_ESP_PHY_DISABLE_PLL_TRACK
     phy_track_pll();
+#endif
 #if CONFIG_ESP_PHY_RECORD_USED_TIME
     phy_record_time(true, modem);
 #endif
@@ -133,7 +137,9 @@ void esp_phy_disable(esp_phy_modem_t modem)
     phy_clr_modem_flag(modem);
     if (phy_get_modem_flag() == 0) {
 
+#if !CONFIG_ESP_PHY_DISABLE_PLL_TRACK
         phy_track_pll_deinit();
+#endif
         phy_close_rf();
         phy_xpd_tsens();
 #if SOC_MODEM_CLOCK_IS_INDEPENDENT