From 9f07b80c271f44f6161c16ceb91c250ee389c5b4 Mon Sep 17 00:00:00 2001 From: Wei Yu Han Date: Thu, 30 Oct 2025 14:24:10 +0800 Subject: [PATCH] docs(ble): Replaced the current table with the link to the Power Save README (cherry picked from commit 13b04ab89eafebcec225bc95aa821ef86d46fd4b) Co-authored-by: Wei Yuhan --- .../low-power-mode/low-power-mode-ble.rst | 15 ++------------- .../low-power-mode/low-power-mode-ble.rst | 15 ++------------- 2 files changed, 4 insertions(+), 26 deletions(-) diff --git a/docs/en/api-guides/low-power-mode/low-power-mode-ble.rst b/docs/en/api-guides/low-power-mode/low-power-mode-ble.rst index 7e8cd97f7a..27d93d70b5 100644 --- a/docs/en/api-guides/low-power-mode/low-power-mode-ble.rst +++ b/docs/en/api-guides/low-power-mode/low-power-mode-ble.rst @@ -36,19 +36,8 @@ To select the main XTAL as the BLE internal clock source, configure the followin - \ (X) Use main XTAL as RTC clock source -When this is selected, the main XTAL remains powered on during light-sleep, resulting in higher current consumption. The current reference for light-sleep using XTAL versus a 32kHz external crystal is shown below: - -.. list-table:: Current Reference Values for Different Clock Sources in Light-sleep Mode - :widths: auto - :header-rows: 1 - - * - Clock Source - - Typical Light-sleep Current - * - Main XTAL - - 3.3 mA - * - 32kHz External Crystal / 136 kHz RC - - 34 uA - +When this is selected, the main XTAL remains powered on during light-sleep, resulting in higher current consumption. +Please refer :example_file:`Power Save README ` for the typical current consumption in light-sleep using XTAL versus a 32kHz external crystal. Selecting 32kHz External Crystal ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/docs/zh_CN/api-guides/low-power-mode/low-power-mode-ble.rst b/docs/zh_CN/api-guides/low-power-mode/low-power-mode-ble.rst index 2e0be9b407..d4221c4383 100644 --- a/docs/zh_CN/api-guides/low-power-mode/low-power-mode-ble.rst +++ b/docs/zh_CN/api-guides/low-power-mode/low-power-mode-ble.rst @@ -36,19 +36,8 @@ - \ (X) Use main XTAL as RTC clock source -选择主晶振后，light-sleep 模式下主晶振电源不会关闭，因此电流消耗更高。使用 XTAL 和 32kHz 外部晶振时 light-sleep 电流参考如下： - -.. list-table:: light-sleep 模式下不同时钟源的电流参考值 - :widths: auto - :header-rows: 1 - - * - 时钟源 - - 典型 light-sleep 电流 - * - 主晶振 - - 3.3 mA - * - 32kHz 外部晶振 / 136 kHz RC - - 34 uA - +选择主晶振后，light-sleep 模式下主晶振电源不会关闭，因此电流消耗更高。 +有关使用主晶振与 32kHz 外部晶振在 light-sleep 模式下的典型电流消耗，请参考 :example_file:`Power Save README ` 。 选择 32kHz 外部晶振 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^