pioduino/esp-idf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Zigbee: Add light example

Browse Source 
* provide light example for acting as zigbee coordinator, router and end-device
* remove unused componenent for example usage
* remove unused variable
* clean up unused header include for example
* update the license header
* update copyright
* Add readme for instruction adding esp-zboss-lib component
* esp-idf:update copy_right_check ignore file
* CI: fix the ci check error from pipeline
* sdkconfig: default set change for better user use
* use Button (BOOT) as switch input
* update the statemachine for debouncing
* esp-zboss-lib: support lib 0.0.2
* fix warning issue from example
This commit is contained in:
likunqiao
2021-10-20 18:45:55 +08:00
parent f788c337b1
commit a9146920b9
29 changed files with 1622 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files
examples/zigbee/light_sample/light_switch/README.md
+55
View File
@@ -0,0 +1,55 @@
| Supported Targets | ESP32-H2 |
| ----------------- | -------- |
# Light Switch Example
(See the `README.md` file in the upper level 'examples' directory for more information about examples.)
This test code shows how to configure Zigbee end device and use it as a light switch
## Hardware Required
* One development board with ESP32-H2 SoC acting as Zigbee end device (loaded with light switch example)
* A USB cable for power supply and programming
* Choose another ESP32-H2 as Zigbee coordinator (see [light coordinator example](../light_coordinator))
* Choose another ESP32-H2 as Zigbee router (see [light bulb example](../light_bulb))
## Configure the project
[**Mandatory**] Download esp-zboss-lib packages from [Espressif's component serivce](https://components.espressif.com/).
You can add them to your project via `idf.py add-dependency espressif/esp-zboss-lib==0.0.2`
Before project configuration and build, make sure to set the correct chip target using `idf.py set-target esp32h2`.
## Build and Flash
Build the project, flash it to the board, and start the monitor tool to view the serial output by running `idf.py -p PORT flash monitor`.
(To exit the serial monitor, type ``Ctrl-]``.)
## Example Output
As you run the example, you will see the following log:
light switch:
I (9423) gpio: GPIO[9]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2
I (9523) ESP_ZB_SWITCH: status: -1
I (9523) ESP_ZB_SWITCH: Zigbee stack initialized
I (9523) ESP_ZB_SWITCH: Start network steering
I (11263) ESP_ZB_SWITCH: Joined network successfully (Extended PAN ID: f9:54:2d:01:a0:03:f7:84, PAN ID: 0xf5b5)
I (13433) ESP_ZB_SWITCH: Found bulb addr: 0x434a ep: 10
I (16433) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (17663) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (18693) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (19833) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (20753) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (21363) ESP_ZB_SWITCH: Send ON/OFF toggle command
## Light Control Functions
* By toggling the switch button (BOOT) on this board, the LED on the board loaded with the `light bulb` example will be on and off.
## Troubleshooting
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.