pioduino/esp-idf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

esp32: Use package identifier to look up SPI flash/PSRAM WP Pin, unless overridden

Browse Source 
Allows booting in QIO/QOUT mode or with PSRAM on ESP32-PICO-V3 and
ESP32-PICO-V3-O2 without any config changes.

Custom WP pins (needed for fully custom circuit boards) should still be compatible.
This commit is contained in:
Angus Gratton
2020-07-07 14:35:52 +10:00
committed by chenjianqiang
parent e9dd4f283a
commit c09fdc0b09
6 changed files with 103 additions and 61 deletions
Download Patch File Download Diff File Expand all files Collapse all files
components/bootloader_support/src/bootloader_flash_config_esp32.c
+31 -1
View File
@@ -25,6 +25,7 @@
#include "soc/spi_reg.h"
#include "soc/spi_caps.h"
#include "flash_qio_mode.h"
#include "bootloader_common.h"
#include "bootloader_flash_config.h"
void bootloader_flash_update_id(void)
@@ -156,4 +157,33 @@ void IRAM_ATTR bootloader_flash_dummy_config(const esp_image_header_t* pfhdr)
SET_PERI_REG_BITS(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN_V, spi_cache_dummy + g_rom_spiflash_dummy_len_plus[0],
SPI_USR_DUMMY_CYCLELEN_S);
}
}
#define ESP32_D2WD_WP_GPIO 7 /* ESP32-D2WD & ESP32-PICO-D4 has this GPIO wired to WP pin of flash */
#define ESP32_PICO_V3_GPIO 18 /* ESP32-PICO-V3* use this GPIO for WP pin of flash */
int bootloader_flash_get_wp_pin(void)
{
#if CONFIG_BOOTLOADER_SPI_CUSTOM_WP_PIN
return CONFIG_BOOTLOADER_SPI_WP_PIN; // can be set for bootloader when QIO or QOUT config in use
#elif CONFIG_SPIRAM_CUSTOM_SPIWP_SD3_PIN
return CONFIG_SPIRAM_SPIWP_SD3_PIN; // can be set for app when DIO or DOUT config used for PSRAM only
#else
// no custom value, find it based on the package eFuse value
uint8_t chip_ver;
uint32_t pkg_ver = REG_GET_FIELD(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_VER_PKG);
switch(pkg_ver) {
case EFUSE_RD_CHIP_VER_PKG_ESP32D2WDQ5:
return ESP32_D2WD_WP_GPIO;
case EFUSE_RD_CHIP_VER_PKG_ESP32PICOD2:
case EFUSE_RD_CHIP_VER_PKG_ESP32PICOD4:
/* Same package IDs are used for ESP32-PICO-V3 and ESP32-PICO-D4, silicon version differentiates */
chip_ver = bootloader_common_get_chip_revision();
return (chip_ver < 3) ? ESP32_D2WD_WP_GPIO : ESP32_PICO_V3_GPIO;
case EFUSE_RD_CHIP_VER_PKG_ESP32PICOV302:
return ESP32_PICO_V3_GPIO;
default:
return SPI_WP_GPIO_NUM;
}
#endif
}
components/bootloader_support/src/flash_qio_mode.c
+4 -31
View File
@@ -13,6 +13,7 @@
// limitations under the License.
#include <stddef.h>
#include <stdint.h>
#include "bootloader_flash_config.h"
#include "flash_qio_mode.h"
#include "esp_log.h"
#include "esp_err.h"
@@ -83,12 +84,6 @@ static unsigned read_status_8b_xmc25qu64a(void);
/* Write 8 bit status of XM25QU64A */
static void write_status_8b_xmc25qu64a(unsigned new_status);
#define ESP32_D2WD_WP_GPIO 7 /* ESP32-D2WD has this GPIO wired to WP pin of flash */
#ifndef CONFIG_BOOTLOADER_SPI_WP_PIN // Set in menuconfig if SPI flasher config is set to a quad mode
#define CONFIG_BOOTLOADER_SPI_WP_PIN ESP32_D2WD_WP_GPIO
#endif
/* Array of known flash chips and data to enable Quad I/O mode
Manufacturer & flash ID can be tested by running "esptool.py
@@ -223,25 +218,6 @@ static esp_err_t enable_qio_mode(read_status_fn_t read_status_fn,
uint32_t status;
const uint32_t spiconfig = esp_rom_efuse_get_flash_gpio_info();
#if CONFIG_IDF_TARGET_ESP32
if (spiconfig != ESP_ROM_EFUSE_FLASH_DEFAULT_SPI && spiconfig != ESP_ROM_EFUSE_FLASH_DEFAULT_HSPI) {
// spiconfig specifies a custom efuse pin configuration. This config defines all pins -except- WP,
// which is compiled into the bootloader instead.
//
// Most commonly an overriden pin mapping means ESP32-D2WD or ESP32-PICO series.
//Warn if chip is ESP32-D2WD/ESP32-PICO series but someone has changed the WP pin
//assignment from that chip's WP pin.
uint32_t pkg_ver = REG_GET_FIELD(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_VER_PKG);
if (CONFIG_BOOTLOADER_SPI_WP_PIN != ESP32_D2WD_WP_GPIO &&
(pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32D2WDQ5 ||
pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD2 ||
pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD4 ||
pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32PICOV302)) {
ESP_LOGW(TAG, "Chip is ESP32-D2WD/ESP32-PICO series, but flash WP pin is different value to internal flash");
}
}
#endif
esp_rom_spiflash_wait_idle(&g_rom_flashchip);
status = read_status_fn();
@@ -276,13 +252,10 @@ static esp_err_t enable_qio_mode(read_status_fn_t read_status_fn,
esp_rom_spiflash_config_readmode(mode);
#if CONFIG_IDF_TARGET_ESP32
esp_rom_spiflash_select_qio_pins(CONFIG_BOOTLOADER_SPI_WP_PIN, spiconfig);
int wp_pin = bootloader_flash_get_wp_pin();
esp_rom_spiflash_select_qio_pins(wp_pin, spiconfig);
#elif CONFIG_IDF_TARGET_ESP32S2
if (esp_rom_efuse_get_flash_wp_gpio() <= MAX_PAD_GPIO_NUM) {
esp_rom_spiflash_select_qio_pins(esp_rom_efuse_get_flash_wp_gpio(), spiconfig);
} else {
esp_rom_spiflash_select_qio_pins(CONFIG_BOOTLOADER_SPI_WP_PIN, spiconfig);
}
esp_rom_spiflash_select_qio_pins(esp_rom_efuse_get_flash_wp_gpio(), spiconfig);
#endif
return ESP_OK;
}