pioduino/esp-idf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

docs: remove incorrect note from get started of esp32s3

Browse Source
This commit is contained in:
Linda
2023-02-15 15:44:39 +08:00
parent 50ae186ff7
commit c36b2eac6f
2 changed files with 10 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/en/get-started/establish-serial-connection.rst
+5 -1
View File
@@ -146,12 +146,16 @@ Sometimes the USB-to-UART bridge is external. This is often used in small develo
The USB on the {IDF_TARGET_NAME} uses the **{IDF_TARGET_USB_PIN_DP}** for **D+** and **{IDF_TARGET_USB_PIN_DM}** for **D-**.
.. only:: SOC_USB_SERIAL_JTAG_SUPPORTED
.. only:: SOC_USB_SERIAL_JTAG_SUPPORTED and not esp32s3
.. note:: The {IDF_TARGET_NAME} supports only *USB CDC and JTAG*.
If you are flashing for the first time, you need to get the {IDF_TARGET_NAME} into the download mode manually. To do so, press and hold the ``BOOT`` button and then press the ``RESET`` button once. After that release the ``BOOT`` button.
.. only:: esp32s3
If you are flashing for the first time, you need to get the {IDF_TARGET_NAME} into the download mode manually. To do so, press and hold the ``BOOT`` button and then press the ``RESET`` button once. After that release the ``BOOT`` button.
.. only:: esp32s2
After flashing the binaries, a manual reset is needed.