efuse: Add support for esp32h2
This commit is contained in:
KonstantinKondrashov
committed by
BOT
BOT
parent
cabfc75c3c
commit
f3394c488a
@@ -1,178 +1,154 @@
|
||||
|
||||
# field_name, | efuse_block, | bit_start, | bit_count, |comment #
|
||||
# | (EFUSE_BLK0 | (0..255) | (1..-) | #
|
||||
# | EFUSE_BLK1 | |MAX_BLK_LEN*| #
|
||||
# | ... | | | #
|
||||
# | EFUSE_BLK10)| | | #
|
||||
# | (EFUSE_BLK0 | (0..255) | (1-256) | #
|
||||
# | EFUSE_BLK1 | | | #
|
||||
# | ...) | | | #
|
||||
##########################################################################
|
||||
# *) The value MAX_BLK_LEN depends on CONFIG_EFUSE_MAX_BLK_LEN, will be replaced with "None" - 256. "3/4" - 192. "REPEAT" - 128.
|
||||
# !!!!!!!!!!! #
|
||||
# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse-common-table"
|
||||
# After editing this file, run the command manually "idf.py efuse-common-table"
|
||||
# this will generate new source files, next rebuild all the sources.
|
||||
# !!!!!!!!!!! #
|
||||
|
||||
# EFUSE_RD_REPEAT_DATA BLOCK #
|
||||
##############################
|
||||
# EFUSE_RD_WR_DIS_REG #
|
||||
WR_DIS, EFUSE_BLK0, 0, 32, Write protection
|
||||
WR_DIS.RD_DIS, EFUSE_BLK0, 0, 1, Write protection for RD_DIS_KEY0 RD_DIS_KEY1 RD_DIS_KEY2 RD_DIS_KEY3 RD_DIS_KEY4 RD_DIS_KEY5 RD_DIS_SYS_DATA_PART2
|
||||
WR_DIS.SWAP_UART_SDIO_EN, EFUSE_BLK0, 1, 1, Write protection for SWAP_UART_SDIO_EN
|
||||
WR_DIS.GROUP_1, EFUSE_BLK0, 2, 1, Write protection for DIS_ICACHE DIS_USB_JTAG DIS_DOWNLOAD_ICACHE DIS_USB_SERIAL_JTAG DIS_FORCE_DOWNLOAD DIS_TWAI DIS_JTAG_SEL_ENABLE SOFT_DIS_JTAG DIS_PADJTAG DIS_DOWNLOAD_MANUAL_ENCRYPT
|
||||
WR_DIS.GROUP_2, EFUSE_BLK0, 3, 1, Write protection for WDT_DELAY_SEL
|
||||
WR_DIS.SPI_BOOT_CRYPT_CNT, EFUSE_BLK0, 4, 1, Write protection for SPI_BOOT_CRYPT_CNT
|
||||
WR_DIS.SECURE_BOOT_KEY_REVOKE0,EFUSE_BLK0, 5, 1, Write protection for SECURE_BOOT_KEY_REVOKE0
|
||||
WR_DIS.SECURE_BOOT_KEY_REVOKE1,EFUSE_BLK0, 6, 1, Write protection for SECURE_BOOT_KEY_REVOKE1
|
||||
WR_DIS.SECURE_BOOT_KEY_REVOKE2,EFUSE_BLK0, 7, 1, Write protection for SECURE_BOOT_KEY_REVOKE2
|
||||
WR_DIS.KEY0_PURPOSE, EFUSE_BLK0, 8, 1, Write protection for key_purpose. KEY0
|
||||
WR_DIS.KEY1_PURPOSE, EFUSE_BLK0, 9, 1, Write protection for key_purpose. KEY1
|
||||
WR_DIS.KEY2_PURPOSE, EFUSE_BLK0, 10, 1, Write protection for key_purpose. KEY2
|
||||
WR_DIS.KEY3_PURPOSE, EFUSE_BLK0, 11, 1, Write protection for key_purpose. KEY3
|
||||
WR_DIS.KEY4_PURPOSE, EFUSE_BLK0, 12, 1, Write protection for key_purpose. KEY4
|
||||
WR_DIS.KEY5_PURPOSE, EFUSE_BLK0, 13, 1, Write protection for key_purpose. KEY5
|
||||
WR_DIS.SEC_DPA_LEVEL, EFUSE_BLK0, 14, 1, Write protection for SEC_DPA_LEVEL
|
||||
WR_DIS.SECURE_BOOT_EN, EFUSE_BLK0, 15, 1, Write protection for SECURE_BOOT_EN
|
||||
WR_DIS.SECURE_BOOT_AGGRESSIVE_REVOKE,EFUSE_BLK0, 16, 1, Write protection for SECURE_BOOT_AGGRESSIVE_REVOKE
|
||||
WR_DIS.GROUP_3, EFUSE_BLK0, 18, 1, Write protection for FLASH_TPUW DIS_DOWNLOAD_MODE DIS_DIRECT_BOOT DIS_USB_PRINT DIS_USB_DOWNLOAD_MODE ENABLE_SECURITY_DOWNLOAD UART_PRINT_CONTROLFLASH_TYPE FORCE_SEND_RESUME SECURE_VERSION
|
||||
WR_DIS.SECURE_BOOT_DISABLE_FAST_WAKE,EFUSE_BLK0, 19, 1, Write protection for SECURE_BOOT_DISABLE_FAST_WAKE
|
||||
WR_DIS.BLK1, EFUSE_BLK0, 20, 1, Write protection for EFUSE_BLK1. MAC_SPI_8M_SYS
|
||||
WR_DIS.SYS_DATA_PART1, EFUSE_BLK0, 21, 1, Write protection for EFUSE_BLK2. SYS_DATA_PART1
|
||||
WR_DIS.USER_DATA, EFUSE_BLK0, 22, 1, Write protection for EFUSE_BLK3. USER_DATA
|
||||
WR_DIS.KEY0, EFUSE_BLK0, 23, 1, Write protection for EFUSE_BLK4. KEY0
|
||||
WR_DIS.KEY1, EFUSE_BLK0, 24, 1, Write protection for EFUSE_BLK5. KEY1
|
||||
WR_DIS.KEY2, EFUSE_BLK0, 25, 1, Write protection for EFUSE_BLK6. KEY2
|
||||
WR_DIS.KEY3, EFUSE_BLK0, 26, 1, Write protection for EFUSE_BLK7. KEY3
|
||||
WR_DIS.KEY4, EFUSE_BLK0, 27, 1, Write protection for EFUSE_BLK8. KEY4
|
||||
WR_DIS.KEY5, EFUSE_BLK0, 28, 1, Write protection for EFUSE_BLK9. KEY5
|
||||
WR_DIS.SYS_DATA_PART2, EFUSE_BLK0, 29, 1, Write protection for EFUSE_BLK10. SYS_DATA_PART2
|
||||
# This file was generated by regtools.py based on the efuses.yaml file with the version: 304372753f7bc2d7665354c487c05b4e
|
||||
|
||||
# EFUSE_RD_REPEAT_DATA0_REG #
|
||||
RD_DIS, EFUSE_BLK0, 32, 7, Read protection
|
||||
RD_DIS.KEY0, EFUSE_BLK0, 32, 1, Read protection for EFUSE_BLK4. KEY0
|
||||
RD_DIS.KEY1, EFUSE_BLK0, 33, 1, Read protection for EFUSE_BLK5. KEY1
|
||||
RD_DIS.KEY2, EFUSE_BLK0, 34, 1, Read protection for EFUSE_BLK6. KEY2
|
||||
RD_DIS.KEY3, EFUSE_BLK0, 35, 1, Read protection for EFUSE_BLK7. KEY3
|
||||
RD_DIS.KEY4, EFUSE_BLK0, 36, 1, Read protection for EFUSE_BLK8. KEY4
|
||||
RD_DIS.KEY5, EFUSE_BLK0, 37, 1, Read protection for EFUSE_BLK9. KEY5
|
||||
RD_DIS.SYS_DATA_PART2, EFUSE_BLK0, 38, 1, Read protection for EFUSE_BLK10. SYS_DATA_PART2
|
||||
SWAP_UART_SDIO_EN, EFUSE_BLK0, 39, 1, Swap pad of uart and sdio.
|
||||
DIS_ICACHE, EFUSE_BLK0, 40, 1, Disable Icache
|
||||
DIS_USB_JTAG, EFUSE_BLK0, 41, 1, Disable USB JTAG
|
||||
DIS_DOWNLOAD_ICACHE, EFUSE_BLK0, 42, 1, Disable Icache in download mode
|
||||
DIS_USB_SERIAL_JTAG, EFUSE_BLK0, 43, 1, Disable USB_SERIAL_JTAG
|
||||
DIS_FORCE_DOWNLOAD, EFUSE_BLK0, 44, 1, Disable force chip go to download mode function
|
||||
DIS_TWAI, EFUSE_BLK0, 46, 1, Disable TWAI function
|
||||
JTAG_SEL_ENABLE, EFUSE_BLK0, 47, 1, Set this bit to enable selection between usb_to_jtag and pad_to_jtag through strapping gpio10 when both reg_dis_usb_jtag and reg_dis_pad_jtag are equal to 0.
|
||||
SOFT_DIS_JTAG, EFUSE_BLK0, 48, 3, Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.
|
||||
DIS_PAD_JTAG, EFUSE_BLK0, 51, 1, Disable JTAG in the hard way. JTAG is disabled permanently.
|
||||
DIS_DOWNLOAD_MANUAL_ENCRYPT, EFUSE_BLK0, 52, 1, Disable flash encryption when in download boot modes.
|
||||
USB_DREFH, EFUSE_BLK0, 53, 2, Controls single-end input threshold vrefh 1.76 V to 2 V with step of 80 mV stored in eFuse.
|
||||
USB_DREFL, EFUSE_BLK0, 55, 2, Controls single-end input threshold vrefl 0.8 V to 1.04 V with step of 80 mV stored in eFuse.
|
||||
USB_EXCHG_PINS, EFUSE_BLK0, 57, 1, Exchange D+ D- pins
|
||||
VDD_SPI_AS_GPIO, EFUSE_BLK0, 58, 1, Set this bit to vdd spi pin function as gpio
|
||||
|
||||
|
||||
# EFUSE_RD_REPEAT_DATA1_REG #
|
||||
WDT_DELAY_SEL, EFUSE_BLK0, 80, 2, Select RTC WDT time out threshold
|
||||
SPI_BOOT_CRYPT_CNT, EFUSE_BLK0, 82, 3, SPI boot encrypt decrypt enable. odd number 1 enable. even number 1 disable
|
||||
SECURE_BOOT_KEY_REVOKE0, EFUSE_BLK0, 85, 1, Enable revoke first secure boot key
|
||||
SECURE_BOOT_KEY_REVOKE1, EFUSE_BLK0, 86, 1, Enable revoke second secure boot key
|
||||
SECURE_BOOT_KEY_REVOKE2, EFUSE_BLK0, 87, 1, Enable revoke third secure boot key
|
||||
KEY_PURPOSE_0, EFUSE_BLK0, 88, 4, Key0 purpose
|
||||
KEY_PURPOSE_1, EFUSE_BLK0, 92, 4, Key1 purpose
|
||||
|
||||
# EFUSE_RD_REPEAT_DATA2_REG #
|
||||
KEY_PURPOSE_2, EFUSE_BLK0, 96, 4, Key2 purpose
|
||||
KEY_PURPOSE_3, EFUSE_BLK0, 100, 4, Key3 purpose
|
||||
KEY_PURPOSE_4, EFUSE_BLK0, 104, 4, Key4 purpose
|
||||
KEY_PURPOSE_5, EFUSE_BLK0, 108, 4, Key5 purpose
|
||||
SEC_DPA_LEVEL, EFUSE_BLK0, 112, 2, Configures the clock random divide mode to determine the spa secure level
|
||||
SECURE_BOOT_EN, EFUSE_BLK0, 116, 1, Secure boot enable
|
||||
SECURE_BOOT_AGGRESSIVE_REVOKE, EFUSE_BLK0, 117, 1, Enable aggressive secure boot revoke
|
||||
FLASH_TPUW, EFUSE_BLK0, 124, 4, Flash wait time after power up. (unit is ms). When value is 15. the time is 30 ms
|
||||
|
||||
# EFUSE_RD_REPEAT_DATA3_REG #
|
||||
DIS_DOWNLOAD_MODE, EFUSE_BLK0, 128, 1, Disble download mode include boot_mode[3:0] is 0 1 2 3 6 7
|
||||
DIS_DIRECT_BOOT, EFUSE_BLK0, 129, 1, Disable direct boot mode
|
||||
DIS_USB_PRINT, EFUSE_BLK0, 130, 1, Disable USB Print
|
||||
DIS_USB_DOWNLOAD_MODE, EFUSE_BLK0, 132, 1, Disable download through USB
|
||||
ENABLE_SECURITY_DOWNLOAD, EFUSE_BLK0, 133, 1, Enable security download mode
|
||||
UART_PRINT_CONTROL, EFUSE_BLK0, 134, 2, b00:force print. b01:control by GPIO8 - low level print. b10:control by GPIO8 - high level print. b11:force disable print.
|
||||
FORCE_SEND_RESUME, EFUSE_BLK0, 141, 1, Force ROM code to send a resume command during SPI boot
|
||||
SECURE_VERSION, EFUSE_BLK0, 142, 16, Secure version for anti-rollback
|
||||
|
||||
# EFUSE_RD_REPEAT_DATA4_REG #
|
||||
DISABLE_WAFER_VERSION_MAJOR, EFUSE_BLK0, 160, 1, Disables check of wafer version major
|
||||
DISABLE_BLK_VERSION_MAJOR, EFUSE_BLK0, 161, 1, Disables check of blk version major
|
||||
|
||||
# MAC_SPI_SYS BLOCK#
|
||||
#######################
|
||||
# RD_MAC_SPI_SYS_0 - RD_MAC_SPI_SYS_2
|
||||
MAC_FACTORY, EFUSE_BLK1, 40, 8, Factory MAC addr [0]
|
||||
, EFUSE_BLK1, 32, 8, Factory MAC addr [1]
|
||||
, EFUSE_BLK1, 24, 8, Factory MAC addr [2]
|
||||
, EFUSE_BLK1, 16, 8, Factory MAC addr [3]
|
||||
, EFUSE_BLK1, 8, 8, Factory MAC addr [4]
|
||||
, EFUSE_BLK1, 0, 8, Factory MAC addr [5]
|
||||
SPI_PAD_CONFIG_CLK, EFUSE_BLK1, 48, 6, SPI_PAD_configure CLK
|
||||
SPI_PAD_CONFIG_Q_D1, EFUSE_BLK1, 54, 6, SPI_PAD_configure Q(D1)
|
||||
SPI_PAD_CONFIG_D_D0, EFUSE_BLK1, 60, 6, SPI_PAD_configure D(D0)
|
||||
SPI_PAD_CONFIG_CS, EFUSE_BLK1, 66, 6, SPI_PAD_configure CS
|
||||
SPI_PAD_CONFIG_HD_D3, EFUSE_BLK1, 72, 6, SPI_PAD_configure HD(D3)
|
||||
SPI_PAD_CONFIG_WP_D2, EFUSE_BLK1, 78, 6, SPI_PAD_configure WP(D2)
|
||||
SPI_PAD_CONFIG_DQS, EFUSE_BLK1, 84, 6, SPI_PAD_configure DQS
|
||||
SPI_PAD_CONFIG_D4, EFUSE_BLK1, 90, 6, SPI_PAD_configure D4
|
||||
SPI_PAD_CONFIG_D5, EFUSE_BLK1, 96, 6, SPI_PAD_configure D5
|
||||
|
||||
# RD_MAC_SPI_SYS_3
|
||||
SPI_PAD_CONFIG_D6, EFUSE_BLK1, 102, 6, SPI_PAD_configure D6
|
||||
SPI_PAD_CONFIG_D7, EFUSE_BLK1, 108, 6, SPI_PAD_configure D7
|
||||
WAFER_VERSION_MINOR, EFUSE_BLK1, 114, 3, WAFER_VERSION_MINOR least significant bits
|
||||
, EFUSE_BLK1, 183, 1, WAFER_VERSION_MINOR most significant bit
|
||||
# WAFER_VERSION_MINOR most significant bit is from RD_MAC_SPI_SYS_5
|
||||
PKG_VERSION, EFUSE_BLK1, 117, 3, Package version 0:ESP32C3
|
||||
BLK_VERSION_MINOR, EFUSE_BLK1, 120, 3, BLK_VERSION_MINOR
|
||||
|
||||
# RD_MAC_SPI_SYS_5
|
||||
# WAFER_VERSION_MINOR most significant bit
|
||||
WAFER_VERSION_MAJOR, EFUSE_BLK1, 184, 2, WAFER_VERSION_MAJOR
|
||||
|
||||
# SYS_DATA_PART1 BLOCK# - System configuration
|
||||
#######################
|
||||
# RD_SYS_PART1_DATA0 - rd_sys_part1_data3
|
||||
OPTIONAL_UNIQUE_ID, EFUSE_BLK2, 0, 128, Optional unique 128-bit ID
|
||||
|
||||
# RD_SYS_PART1_DATA4
|
||||
BLK_VERSION_MAJOR, EFUSE_BLK2, 128, 2, BLK_VERSION_MAJOR of BLOCK2
|
||||
TEMP_CALIB, EFUSE_BLK2, 131, 9, Temperature calibration data
|
||||
OCODE, EFUSE_BLK2, 140, 8, ADC OCode
|
||||
ADC1_INIT_CODE_ATTEN0, EFUSE_BLK2, 148, 10, ADC1 init code at atten0
|
||||
ADC1_INIT_CODE_ATTEN1, EFUSE_BLK2, 158, 10, ADC1 init code at atten1
|
||||
|
||||
# RD_SYS_PART1_DATA5
|
||||
ADC1_INIT_CODE_ATTEN2, EFUSE_BLK2, 168, 10, ADC1 init code at atten2
|
||||
ADC1_INIT_CODE_ATTEN3, EFUSE_BLK2, 178, 10, ADC1 init code at atten3
|
||||
ADC1_CAL_VOL_ATTEN0, EFUSE_BLK2, 188, 10, ADC1 calibration voltage at atten0
|
||||
ADC1_CAL_VOL_ATTEN1, EFUSE_BLK2, 198, 10, ADC1 calibration voltage at atten1
|
||||
ADC1_CAL_VOL_ATTEN2, EFUSE_BLK2, 208, 10, ADC1 calibration voltage at atten2
|
||||
ADC1_CAL_VOL_ATTEN3, EFUSE_BLK2, 218, 10, ADC1 calibration voltage at atten3
|
||||
|
||||
################
|
||||
USER_DATA, EFUSE_BLK3, 0, 256, User data
|
||||
USER_DATA.MAC_CUSTOM, EFUSE_BLK3, 200, 48, Custom MAC
|
||||
|
||||
################
|
||||
KEY0, EFUSE_BLK4, 0, 256, Key0 or user data
|
||||
KEY1, EFUSE_BLK5, 0, 256, Key1 or user data
|
||||
KEY2, EFUSE_BLK6, 0, 256, Key2 or user data
|
||||
KEY3, EFUSE_BLK7, 0, 256, Key3 or user data
|
||||
KEY4, EFUSE_BLK8, 0, 256, Key4 or user data
|
||||
KEY5, EFUSE_BLK9, 0, 256, Key5 or user data
|
||||
SYS_DATA_PART2, EFUSE_BLK10, 0, 256, System configuration
|
||||
|
||||
# AUTO CONFIG DIG&RTC DBIAS#
|
||||
################
|
||||
K_RTC_LDO, EFUSE_BLK1, 135, 7, BLOCK1 K_RTC_LDO
|
||||
K_DIG_LDO, EFUSE_BLK1, 142, 7, BLOCK1 K_DIG_LDO
|
||||
V_RTC_DBIAS20, EFUSE_BLK1, 149, 8, BLOCK1 voltage of rtc dbias20
|
||||
V_DIG_DBIAS20, EFUSE_BLK1, 157, 8, BLOCK1 voltage of digital dbias20
|
||||
DIG_DBIAS_HVT, EFUSE_BLK1, 165, 5, BLOCK1 digital dbias when hvt
|
||||
THRES_HVT, EFUSE_BLK1, 170, 10, BLOCK1 pvt threshold when hvt
|
||||
WR_DIS, EFUSE_BLK0, 0, 32, [] Disable programming of individual eFuses
|
||||
WR_DIS.RD_DIS, EFUSE_BLK0, 0, 1, [] wr_dis of RD_DIS
|
||||
WR_DIS.DIS_ICACHE, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_ICACHE
|
||||
WR_DIS.DIS_USB_JTAG, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_USB_JTAG
|
||||
WR_DIS.POWERGLITCH_EN, EFUSE_BLK0, 2, 1, [] wr_dis of POWERGLITCH_EN
|
||||
WR_DIS.DIS_FORCE_DOWNLOAD, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_FORCE_DOWNLOAD
|
||||
WR_DIS.SPI_DOWNLOAD_MSPI_DIS, EFUSE_BLK0, 2, 1, [] wr_dis of SPI_DOWNLOAD_MSPI_DIS
|
||||
WR_DIS.DIS_TWAI, EFUSE_BLK0, 2, 1, [WR_DIS.DIS_CAN] wr_dis of DIS_TWAI
|
||||
WR_DIS.JTAG_SEL_ENABLE, EFUSE_BLK0, 2, 1, [] wr_dis of JTAG_SEL_ENABLE
|
||||
WR_DIS.DIS_PAD_JTAG, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_PAD_JTAG
|
||||
WR_DIS.DIS_DOWNLOAD_MANUAL_ENCRYPT, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_DOWNLOAD_MANUAL_ENCRYPT
|
||||
WR_DIS.WDT_DELAY_SEL, EFUSE_BLK0, 3, 1, [] wr_dis of WDT_DELAY_SEL
|
||||
WR_DIS.SPI_BOOT_CRYPT_CNT, EFUSE_BLK0, 4, 1, [] wr_dis of SPI_BOOT_CRYPT_CNT
|
||||
WR_DIS.SECURE_BOOT_KEY_REVOKE0, EFUSE_BLK0, 5, 1, [] wr_dis of SECURE_BOOT_KEY_REVOKE0
|
||||
WR_DIS.SECURE_BOOT_KEY_REVOKE1, EFUSE_BLK0, 6, 1, [] wr_dis of SECURE_BOOT_KEY_REVOKE1
|
||||
WR_DIS.SECURE_BOOT_KEY_REVOKE2, EFUSE_BLK0, 7, 1, [] wr_dis of SECURE_BOOT_KEY_REVOKE2
|
||||
WR_DIS.KEY_PURPOSE_0, EFUSE_BLK0, 8, 1, [WR_DIS.KEY0_PURPOSE] wr_dis of KEY_PURPOSE_0
|
||||
WR_DIS.KEY_PURPOSE_1, EFUSE_BLK0, 9, 1, [WR_DIS.KEY1_PURPOSE] wr_dis of KEY_PURPOSE_1
|
||||
WR_DIS.KEY_PURPOSE_2, EFUSE_BLK0, 10, 1, [WR_DIS.KEY2_PURPOSE] wr_dis of KEY_PURPOSE_2
|
||||
WR_DIS.KEY_PURPOSE_3, EFUSE_BLK0, 11, 1, [WR_DIS.KEY3_PURPOSE] wr_dis of KEY_PURPOSE_3
|
||||
WR_DIS.KEY_PURPOSE_4, EFUSE_BLK0, 12, 1, [WR_DIS.KEY4_PURPOSE] wr_dis of KEY_PURPOSE_4
|
||||
WR_DIS.KEY_PURPOSE_5, EFUSE_BLK0, 13, 1, [WR_DIS.KEY5_PURPOSE] wr_dis of KEY_PURPOSE_5
|
||||
WR_DIS.SEC_DPA_LEVEL, EFUSE_BLK0, 14, 1, [] wr_dis of SEC_DPA_LEVEL
|
||||
WR_DIS.CRYPT_DPA_ENABLE, EFUSE_BLK0, 14, 1, [] wr_dis of CRYPT_DPA_ENABLE
|
||||
WR_DIS.SECURE_BOOT_EN, EFUSE_BLK0, 15, 1, [] wr_dis of SECURE_BOOT_EN
|
||||
WR_DIS.SECURE_BOOT_AGGRESSIVE_REVOKE, EFUSE_BLK0, 16, 1, [] wr_dis of SECURE_BOOT_AGGRESSIVE_REVOKE
|
||||
WR_DIS.ECDSA_FORCE_USE_HARDWARE_K, EFUSE_BLK0, 17, 1, [] wr_dis of ECDSA_FORCE_USE_HARDWARE_K
|
||||
WR_DIS.FLASH_TPUW, EFUSE_BLK0, 18, 1, [] wr_dis of FLASH_TPUW
|
||||
WR_DIS.DIS_DOWNLOAD_MODE, EFUSE_BLK0, 18, 1, [] wr_dis of DIS_DOWNLOAD_MODE
|
||||
WR_DIS.DIS_DIRECT_BOOT, EFUSE_BLK0, 18, 1, [] wr_dis of DIS_DIRECT_BOOT
|
||||
WR_DIS.DIS_USB_SERIAL_JTAG_ROM_PRINT, EFUSE_BLK0, 18, 1, [WR_DIS.DIS_USB_PRINT] wr_dis of DIS_USB_SERIAL_JTAG_ROM_PRINT
|
||||
WR_DIS.DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE, EFUSE_BLK0, 18, 1, [] wr_dis of DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE
|
||||
WR_DIS.ENABLE_SECURITY_DOWNLOAD, EFUSE_BLK0, 18, 1, [] wr_dis of ENABLE_SECURITY_DOWNLOAD
|
||||
WR_DIS.UART_PRINT_CONTROL, EFUSE_BLK0, 18, 1, [] wr_dis of UART_PRINT_CONTROL
|
||||
WR_DIS.FORCE_SEND_RESUME, EFUSE_BLK0, 18, 1, [] wr_dis of FORCE_SEND_RESUME
|
||||
WR_DIS.SECURE_VERSION, EFUSE_BLK0, 18, 1, [] wr_dis of SECURE_VERSION
|
||||
WR_DIS.SECURE_BOOT_DISABLE_FAST_WAKE, EFUSE_BLK0, 18, 1, [] wr_dis of SECURE_BOOT_DISABLE_FAST_WAKE
|
||||
WR_DIS.HYS_EN_PAD0, EFUSE_BLK0, 19, 1, [] wr_dis of HYS_EN_PAD0
|
||||
WR_DIS.HYS_EN_PAD1, EFUSE_BLK0, 19, 1, [] wr_dis of HYS_EN_PAD1
|
||||
WR_DIS.BLK1, EFUSE_BLK0, 20, 1, [] wr_dis of BLOCK1
|
||||
WR_DIS.MAC, EFUSE_BLK0, 20, 1, [WR_DIS.MAC_FACTORY] wr_dis of MAC
|
||||
WR_DIS.MAC_EXT, EFUSE_BLK0, 20, 1, [] wr_dis of MAC_EXT
|
||||
WR_DIS.WAFER_VERSION_MINOR, EFUSE_BLK0, 20, 1, [] wr_dis of WAFER_VERSION_MINOR
|
||||
WR_DIS.WAFER_VERSION_MAJOR, EFUSE_BLK0, 20, 1, [] wr_dis of WAFER_VERSION_MAJOR
|
||||
WR_DIS.DISABLE_WAFER_VERSION_MAJOR, EFUSE_BLK0, 20, 1, [] wr_dis of DISABLE_WAFER_VERSION_MAJOR
|
||||
WR_DIS.FLASH_CAP, EFUSE_BLK0, 20, 1, [] wr_dis of FLASH_CAP
|
||||
WR_DIS.FLASH_TEMP, EFUSE_BLK0, 20, 1, [] wr_dis of FLASH_TEMP
|
||||
WR_DIS.FLASH_VENDOR, EFUSE_BLK0, 20, 1, [] wr_dis of FLASH_VENDOR
|
||||
WR_DIS.PKG_VERSION, EFUSE_BLK0, 20, 1, [] wr_dis of PKG_VERSION
|
||||
WR_DIS.SYS_DATA_PART1, EFUSE_BLK0, 21, 1, [] wr_dis of BLOCK2
|
||||
WR_DIS.OPTIONAL_UNIQUE_ID, EFUSE_BLK0, 21, 1, [] wr_dis of OPTIONAL_UNIQUE_ID
|
||||
WR_DIS.BLK_VERSION_MINOR, EFUSE_BLK0, 21, 1, [] wr_dis of BLK_VERSION_MINOR
|
||||
WR_DIS.BLK_VERSION_MAJOR, EFUSE_BLK0, 21, 1, [] wr_dis of BLK_VERSION_MAJOR
|
||||
WR_DIS.DISABLE_BLK_VERSION_MAJOR, EFUSE_BLK0, 21, 1, [] wr_dis of DISABLE_BLK_VERSION_MAJOR
|
||||
WR_DIS.BLOCK_USR_DATA, EFUSE_BLK0, 22, 1, [WR_DIS.USER_DATA] wr_dis of BLOCK_USR_DATA
|
||||
WR_DIS.CUSTOM_MAC, EFUSE_BLK0, 22, 1, [WR_DIS.MAC_CUSTOM WR_DIS.USER_DATA_MAC_CUSTOM] wr_dis of CUSTOM_MAC
|
||||
WR_DIS.BLOCK_KEY0, EFUSE_BLK0, 23, 1, [WR_DIS.KEY0] wr_dis of BLOCK_KEY0
|
||||
WR_DIS.BLOCK_KEY1, EFUSE_BLK0, 24, 1, [WR_DIS.KEY1] wr_dis of BLOCK_KEY1
|
||||
WR_DIS.BLOCK_KEY2, EFUSE_BLK0, 25, 1, [WR_DIS.KEY2] wr_dis of BLOCK_KEY2
|
||||
WR_DIS.BLOCK_KEY3, EFUSE_BLK0, 26, 1, [WR_DIS.KEY3] wr_dis of BLOCK_KEY3
|
||||
WR_DIS.BLOCK_KEY4, EFUSE_BLK0, 27, 1, [WR_DIS.KEY4] wr_dis of BLOCK_KEY4
|
||||
WR_DIS.BLOCK_KEY5, EFUSE_BLK0, 28, 1, [WR_DIS.KEY5] wr_dis of BLOCK_KEY5
|
||||
WR_DIS.BLOCK_SYS_DATA2, EFUSE_BLK0, 29, 1, [WR_DIS.SYS_DATA_PART2] wr_dis of BLOCK_SYS_DATA2
|
||||
WR_DIS.USB_EXCHG_PINS, EFUSE_BLK0, 30, 1, [] wr_dis of USB_EXCHG_PINS
|
||||
WR_DIS.VDD_SPI_AS_GPIO, EFUSE_BLK0, 30, 1, [] wr_dis of VDD_SPI_AS_GPIO
|
||||
WR_DIS.SOFT_DIS_JTAG, EFUSE_BLK0, 31, 1, [] wr_dis of SOFT_DIS_JTAG
|
||||
RD_DIS, EFUSE_BLK0, 32, 7, [] Disable reading from BlOCK4-10
|
||||
RD_DIS.BLOCK_KEY0, EFUSE_BLK0, 32, 1, [RD_DIS.KEY0] rd_dis of BLOCK_KEY0
|
||||
RD_DIS.BLOCK_KEY1, EFUSE_BLK0, 33, 1, [RD_DIS.KEY1] rd_dis of BLOCK_KEY1
|
||||
RD_DIS.BLOCK_KEY2, EFUSE_BLK0, 34, 1, [RD_DIS.KEY2] rd_dis of BLOCK_KEY2
|
||||
RD_DIS.BLOCK_KEY3, EFUSE_BLK0, 35, 1, [RD_DIS.KEY3] rd_dis of BLOCK_KEY3
|
||||
RD_DIS.BLOCK_KEY4, EFUSE_BLK0, 36, 1, [RD_DIS.KEY4] rd_dis of BLOCK_KEY4
|
||||
RD_DIS.BLOCK_KEY5, EFUSE_BLK0, 37, 1, [RD_DIS.KEY5] rd_dis of BLOCK_KEY5
|
||||
RD_DIS.BLOCK_SYS_DATA2, EFUSE_BLK0, 38, 1, [RD_DIS.SYS_DATA_PART2] rd_dis of BLOCK_SYS_DATA2
|
||||
DIS_ICACHE, EFUSE_BLK0, 40, 1, [] Represents whether icache is disabled or enabled. 1: disabled. 0: enabled
|
||||
DIS_USB_JTAG, EFUSE_BLK0, 41, 1, [] Represents whether the function of usb switch to jtag is disabled or enabled. 1: disabled. 0: enabled
|
||||
POWERGLITCH_EN, EFUSE_BLK0, 42, 1, [] Represents whether power glitch function is enabled. 1: enabled. 0: disabled
|
||||
DIS_FORCE_DOWNLOAD, EFUSE_BLK0, 44, 1, [] Represents whether the function that forces chip into download mode is disabled or enabled. 1: disabled. 0: enabled
|
||||
SPI_DOWNLOAD_MSPI_DIS, EFUSE_BLK0, 45, 1, [] Represents whether SPI0 controller during boot_mode_download is disabled or enabled. 1: disabled. 0: enabled
|
||||
DIS_TWAI, EFUSE_BLK0, 46, 1, [DIS_CAN] Represents whether TWAI function is disabled or enabled. 1: disabled. 0: enabled
|
||||
JTAG_SEL_ENABLE, EFUSE_BLK0, 47, 1, [] Set this bit to enable selection between usb_to_jtag and pad_to_jtag through strapping gpio25 when both EFUSE_DIS_PAD_JTAG and EFUSE_DIS_USB_JTAG are equal to 0
|
||||
SOFT_DIS_JTAG, EFUSE_BLK0, 48, 3, [] Represents whether JTAG is disabled in soft way. Odd number: disabled. Even number: enabled
|
||||
DIS_PAD_JTAG, EFUSE_BLK0, 51, 1, [] Represents whether JTAG is disabled in the hard way(permanently). 1: disabled. 0: enabled
|
||||
DIS_DOWNLOAD_MANUAL_ENCRYPT, EFUSE_BLK0, 52, 1, [] Represents whether flash encrypt function is disabled or enabled(except in SPI boot mode). 1: disabled. 0: enabled
|
||||
USB_EXCHG_PINS, EFUSE_BLK0, 57, 1, [] Represents whether the D+ and D- pins is exchanged. 1: exchanged. 0: not exchanged
|
||||
VDD_SPI_AS_GPIO, EFUSE_BLK0, 58, 1, [] Represents whether vdd spi pin is functioned as gpio. 1: functioned. 0: not functioned
|
||||
WDT_DELAY_SEL, EFUSE_BLK0, 80, 2, [] Represents whether RTC watchdog timeout threshold is selected at startup. 1: selected. 0: not selected
|
||||
SPI_BOOT_CRYPT_CNT, EFUSE_BLK0, 82, 3, [] Enables flash encryption when 1 or 3 bits are set and disables otherwise {0: "Disable"; 1: "Enable"; 3: "Disable"; 7: "Enable"}
|
||||
SECURE_BOOT_KEY_REVOKE0, EFUSE_BLK0, 85, 1, [] Revoke 1st secure boot key
|
||||
SECURE_BOOT_KEY_REVOKE1, EFUSE_BLK0, 86, 1, [] Revoke 2nd secure boot key
|
||||
SECURE_BOOT_KEY_REVOKE2, EFUSE_BLK0, 87, 1, [] Revoke 3rd secure boot key
|
||||
KEY_PURPOSE_0, EFUSE_BLK0, 88, 4, [KEY0_PURPOSE] Represents the purpose of Key0
|
||||
KEY_PURPOSE_1, EFUSE_BLK0, 92, 4, [KEY1_PURPOSE] Represents the purpose of Key1
|
||||
KEY_PURPOSE_2, EFUSE_BLK0, 96, 4, [KEY2_PURPOSE] Represents the purpose of Key2
|
||||
KEY_PURPOSE_3, EFUSE_BLK0, 100, 4, [KEY3_PURPOSE] Represents the purpose of Key3
|
||||
KEY_PURPOSE_4, EFUSE_BLK0, 104, 4, [KEY4_PURPOSE] Represents the purpose of Key4
|
||||
KEY_PURPOSE_5, EFUSE_BLK0, 108, 4, [KEY5_PURPOSE] Represents the purpose of Key5
|
||||
SEC_DPA_LEVEL, EFUSE_BLK0, 112, 2, [] Represents the spa secure level by configuring the clock random divide mode
|
||||
ECDSA_FORCE_USE_HARDWARE_K, EFUSE_BLK0, 114, 1, [] Represents whether hardware random number k is forced used in ESDCA. 1: force used. 0: not force used
|
||||
CRYPT_DPA_ENABLE, EFUSE_BLK0, 115, 1, [] Represents whether anti-dpa attack is enabled. 1:enabled. 0: disabled
|
||||
SECURE_BOOT_EN, EFUSE_BLK0, 116, 1, [] Represents whether secure boot is enabled or disabled. 1: enabled. 0: disabled
|
||||
SECURE_BOOT_AGGRESSIVE_REVOKE, EFUSE_BLK0, 117, 1, [] Represents whether revoking aggressive secure boot is enabled or disabled. 1: enabled. 0: disabled
|
||||
FLASH_TPUW, EFUSE_BLK0, 124, 4, [] Represents the flash waiting time after power-up; in unit of ms. When the value less than 15; the waiting time is the programmed value. Otherwise; the waiting time is 2 times the programmed value
|
||||
DIS_DOWNLOAD_MODE, EFUSE_BLK0, 128, 1, [] Represents whether Download mode is disabled or enabled. 1: disabled. 0: enabled
|
||||
DIS_DIRECT_BOOT, EFUSE_BLK0, 129, 1, [] Represents whether direct boot mode is disabled or enabled. 1: disabled. 0: enabled
|
||||
DIS_USB_SERIAL_JTAG_ROM_PRINT, EFUSE_BLK0, 130, 1, [DIS_USB_PRINT] Set this bit to disable USB-Serial-JTAG print during rom boot
|
||||
DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE, EFUSE_BLK0, 132, 1, [] Represents whether the USB-Serial-JTAG download function is disabled or enabled. 1: disabled. 0: enabled
|
||||
ENABLE_SECURITY_DOWNLOAD, EFUSE_BLK0, 133, 1, [] Represents whether security download is enabled or disabled. 1: enabled. 0: disabled
|
||||
UART_PRINT_CONTROL, EFUSE_BLK0, 134, 2, [] Set the default UARTboot message output mode {0: "Enable"; 1: "Enable when GPIO8 is low at reset"; 2: "Enable when GPIO8 is high at reset"; 3: "Disable"}
|
||||
FORCE_SEND_RESUME, EFUSE_BLK0, 136, 1, [] Represents whether ROM code is forced to send a resume command during SPI boot. 1: forced. 0:not forced
|
||||
SECURE_VERSION, EFUSE_BLK0, 137, 16, [] Represents the version used by ESP-IDF anti-rollback feature
|
||||
SECURE_BOOT_DISABLE_FAST_WAKE, EFUSE_BLK0, 153, 1, [] Represents whether FAST VERIFY ON WAKE is disabled or enabled when Secure Boot is enabled. 1: disabled. 0: enabled
|
||||
HYS_EN_PAD0, EFUSE_BLK0, 154, 6, [] Set bits to enable hysteresis function of PAD0~5
|
||||
HYS_EN_PAD1, EFUSE_BLK0, 160, 22, [] Set bits to enable hysteresis function of PAD6~27
|
||||
MAC, EFUSE_BLK1, 40, 8, [MAC_FACTORY] MAC address
|
||||
, EFUSE_BLK1, 32, 8, [MAC_FACTORY] MAC address
|
||||
, EFUSE_BLK1, 24, 8, [MAC_FACTORY] MAC address
|
||||
, EFUSE_BLK1, 16, 8, [MAC_FACTORY] MAC address
|
||||
, EFUSE_BLK1, 8, 8, [MAC_FACTORY] MAC address
|
||||
, EFUSE_BLK1, 0, 8, [MAC_FACTORY] MAC address
|
||||
MAC_EXT, EFUSE_BLK1, 48, 16, [] Stores the extended bits of MAC address
|
||||
WAFER_VERSION_MINOR, EFUSE_BLK1, 114, 3, []
|
||||
WAFER_VERSION_MAJOR, EFUSE_BLK1, 117, 2, []
|
||||
DISABLE_WAFER_VERSION_MAJOR, EFUSE_BLK1, 119, 1, [] Disables check of wafer version major
|
||||
FLASH_CAP, EFUSE_BLK1, 120, 3, []
|
||||
FLASH_TEMP, EFUSE_BLK1, 123, 2, []
|
||||
FLASH_VENDOR, EFUSE_BLK1, 125, 3, []
|
||||
PKG_VERSION, EFUSE_BLK1, 128, 3, [] Package version
|
||||
OPTIONAL_UNIQUE_ID, EFUSE_BLK2, 0, 128, [] Optional unique 128-bit ID
|
||||
BLK_VERSION_MINOR, EFUSE_BLK2, 130, 3, [] BLK_VERSION_MINOR of BLOCK2
|
||||
BLK_VERSION_MAJOR, EFUSE_BLK2, 133, 2, [] BLK_VERSION_MAJOR of BLOCK2
|
||||
DISABLE_BLK_VERSION_MAJOR, EFUSE_BLK2, 135, 1, [] Disables check of blk version major
|
||||
USER_DATA, EFUSE_BLK3, 0, 256, [BLOCK_USR_DATA] User data
|
||||
USER_DATA.MAC_CUSTOM, EFUSE_BLK3, 200, 48, [MAC_CUSTOM CUSTOM_MAC] Custom MAC
|
||||
KEY0, EFUSE_BLK4, 0, 256, [BLOCK_KEY0] Key0 or user data
|
||||
KEY1, EFUSE_BLK5, 0, 256, [BLOCK_KEY1] Key1 or user data
|
||||
KEY2, EFUSE_BLK6, 0, 256, [BLOCK_KEY2] Key2 or user data
|
||||
KEY3, EFUSE_BLK7, 0, 256, [BLOCK_KEY3] Key3 or user data
|
||||
KEY4, EFUSE_BLK8, 0, 256, [BLOCK_KEY4] Key4 or user data
|
||||
KEY5, EFUSE_BLK9, 0, 256, [BLOCK_KEY5] Key5 or user data
|
||||
SYS_DATA_PART2, EFUSE_BLK10, 0, 256, [BLOCK_SYS_DATA2] System data part 2 (reserved)
|
||||
|
||||
|
Can't render this file because it contains an unexpected character in line 7 and column 87.
|
Reference in New Issue
Block a user