esp_rom_spiflash_attach is called in cpu_start.c when it's
CONFIG_APP_BUILD_TYPE_RAM && !CONFIG_APP_BUILD_TYPE_PURE_RAM_APP.
This function will:
- reset MSPI
- configure MSPI IOs
- configure MSPI into slow read mode
Prior to this commit, this function is put quite late. It's OK for chips
earlier than C6. On C6 and H2, MMU registers are in SPI_MEM_x, so
resetting MSPI registers will also reset MMU registers.
After this commit, this funciton is called eariler, before
cpu_start.c: bootloader_init().
esp_execute_shared_stack_function always restored the stack watchpoint
regardless of CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK. This would lead
to an abondoned but active watchpoint on a former stack once the task
calling esp_execute_shared_stack_function is deleted, if
CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is inactive.
This has been fixed now.
Closes https://github.com/espressif/esp-idf/issues/10414
If the TimerGroup 0 clock is disabled and then reenabled, the watchdog
registers (Flashboot protection included) will be re-enabled, and some
seconds later, will trigger an unintended reset.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
usb_serial_jtag: Improve the code for the issue of usb cdc device unable to work during sleep
Closes IDFGH-6887
See merge request espressif/esp-idf!20973
1. Remove RTC_CLOCK_BBPLL_POWER_ON_WITH_USB Kconfig option
During sleep, BBPLL clock always gets disabled
esp_restart does not disable BBPLL clock, so that first stage bootloader log can be printed
2. Add a new Kconfig option PM_NO_AUTO_LS_ON_USJ_CONNECTED
When this option is selected, IDF will constantly monitor USB CDC port connection status.
As long as it gets connected to a HOST, automatic light-sleep will not happen.
Closes https://github.com/espressif/esp-idf/issues/8507
- Support SOC ROOT clock source switch
- Support CPU frequency change
- Support RTC SLOW clock source switch
- Support RTC SLOW clock + RC FAST calibration
Remove FPGA build for esp32h2
Initialize the pmu sleep machine constant when pmu is initialized, and calculate
the pmu sleep time adjustment value and hardware configuration value according
to the machine constant during system sleep.
Calibrate fast OSC before each sleep and use the calibration value to calculate
PMU hardware wait cycles when use the fast OSC as the work clock.
- Support SOC ROOT clock source switch
- Support CPU frequency change
- Support RTC SLOW clock source switch
- Support RTC SLOW clock + RC FAST calibration
Remove FPGA build for esp32c6
Michael (XIAO Xufeng)