Files

T

Frantisek Hrbata 1c92945f59 change(examples): switch examples to use a minimal build

Currently, several example dependencies rely on the fact that all
registered components are added to the build, along with components
specified in common requirements. This results in longer build times
because even unused components must be built. Switch all examples to use
idf_minimal_build to compile only the components actually required by
the example.

Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>

2024-11-20 20:14:40 +01:00

main

change(examples): explicitly specify component dependencies for examples

2024-11-20 14:11:24 +01:00

CMakeLists.txt

change(examples): switch examples to use a minimal build

2024-11-20 20:14:40 +01:00

README.md

bluetooth: Added HCI example for combined scanning and advertising.

2020-07-28 05:32:14 +00:00

sdkconfig.defaults

bluetooth: Added HCI example for combined scanning and advertising.

2020-07-28 05:32:14 +00:00

README.md

Supported Targets	ESP32

ESP-IDF Combined Bluetooth advertising and scanning

This is a Bluetooth advertising and scanning demo with virtual HCI interface. Send Reset, ADV_PARAM, ADV_DATA and HCI_ADV_ENABLE command for BLE advertising. And SET_EVENT_MASK, SCAN_PARAMS and SCAN_START commands for BLE scanning. Scanned advertising reports from other devices are also displayed.

In this example no host is used. But some of the functionalities of a host are implemented.