wangmengyang a31d07ba25 move rodata segment of libphy.a to dram ...

1. rodata segment of libphy.a(about 1200B) can be accessed by ISRs, so put it into DRAM

2018-02-02 13:00:11 +08:00

..

elf_to_ld.sh

Initial public version

2016-08-17 23:08:22 +08:00

esp32.common.ld

move rodata segment of libphy.a to dram

2018-02-02 13:00:11 +08:00

esp32.ld

esp32: Change 192KB runtime static limit workaround to a 176KB link time workaround

2017-12-27 11:59:54 +11:00

esp32.peripherals.ld

feature(I2S-ADC): add ADC mode for I2S.

2017-09-14 13:24:08 +08:00

esp32.rom.ld

component/bt: increase programming delay for event arbiter to allow for heavy workload

2017-09-30 18:12:45 +08:00

esp32.rom.nanofmt.ld

newlib: add "full" formatting support, add missing functions

2016-12-08 11:04:54 +08:00

esp32.rom.spiflash.ld

spiflash ROM functions: Remove Quad I/O mode enable/disable code from flash ROM functions

2017-04-13 17:54:42 +10:00

esp32.rom.spiram_incompatible_fns.ld

Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet.

2017-09-04 12:05:49 +08:00

esp32.spiram.rom-functions-dram.ld

Make sure functions that are in ROM in the non-external-ram-workaround version, are in RAM (and not in flash) in the ext-ram workaround version.

2017-09-13 10:36:56 +08:00

esp32.spiram.rom-functions-iram.ld

Make sure functions that are in ROM in the non-external-ram-workaround version, are in RAM (and not in flash) in the ext-ram workaround version.

2017-09-13 10:36:56 +08:00