Add several new examples with espidf
This commit is contained in:
Valeriy Koval
@@ -0,0 +1,3 @@
|
||||
.pioenvs
|
||||
.clang_complete
|
||||
.gcc-flags.json
|
||||
@@ -0,0 +1,65 @@
|
||||
# Continuous Integration (CI) is the practice, in software
|
||||
# engineering, of merging all developer working copies with a shared mainline
|
||||
# several times a day < http://docs.platformio.org/en/stable/ci/index.html >
|
||||
#
|
||||
# Documentation:
|
||||
#
|
||||
# * Travis CI Embedded Builds with PlatformIO
|
||||
# < https://docs.travis-ci.com/user/integration/platformio/ >
|
||||
#
|
||||
# * PlatformIO integration with Travis CI
|
||||
# < http://docs.platformio.org/en/stable/ci/travis.html >
|
||||
#
|
||||
# * User Guide for `platformio ci` command
|
||||
# < http://docs.platformio.org/en/stable/userguide/cmd_ci.html >
|
||||
#
|
||||
#
|
||||
# Please choice one of the following templates (proposed below) and uncomment
|
||||
# it (remove "# " before each line) or use own configuration according to the
|
||||
# Travis CI documentation (see above).
|
||||
#
|
||||
|
||||
|
||||
#
|
||||
# Template #1: General project. Test it using existing `platformio.ini`.
|
||||
#
|
||||
|
||||
# language: python
|
||||
# python:
|
||||
# - "2.7"
|
||||
#
|
||||
# sudo: false
|
||||
# cache:
|
||||
# directories:
|
||||
# - "~/.platformio"
|
||||
#
|
||||
# install:
|
||||
# - pip install -U platformio
|
||||
#
|
||||
# script:
|
||||
# - platformio run
|
||||
|
||||
|
||||
#
|
||||
# Template #2: The project is intended to by used as a library with examples
|
||||
#
|
||||
|
||||
# language: python
|
||||
# python:
|
||||
# - "2.7"
|
||||
#
|
||||
# sudo: false
|
||||
# cache:
|
||||
# directories:
|
||||
# - "~/.platformio"
|
||||
#
|
||||
# env:
|
||||
# - PLATFORMIO_CI_SRC=path/to/test/file.c
|
||||
# - PLATFORMIO_CI_SRC=examples/file.ino
|
||||
# - PLATFORMIO_CI_SRC=path/to/test/directory
|
||||
#
|
||||
# install:
|
||||
# - pip install -U platformio
|
||||
#
|
||||
# script:
|
||||
# - platformio ci --lib="." --board=ID_1 --board=ID_2 --board=ID_N
|
||||
@@ -0,0 +1,38 @@
|
||||
.. Copyright 2014-present PlatformIO <contact@platformio.org>
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
|
||||
How to build PlatformIO based project
|
||||
=====================================
|
||||
|
||||
1. `Install PlatformIO <http://docs.platformio.org/en/stable/installation.html>`_
|
||||
2. Download `development platform with examples <https://github.com/platformio/platform-espressif8266/archive/develop.zip>`_
|
||||
3. Extract ZIP archive
|
||||
4. Run these commands:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
# Change directory to example
|
||||
> cd platform-espressif32/examples/espidf-peripherals-uart
|
||||
|
||||
# Build project
|
||||
> platformio run
|
||||
|
||||
# Upload firmware
|
||||
> platformio run --target upload
|
||||
|
||||
# Build specific environment
|
||||
> platformio run -e esp32dev
|
||||
|
||||
# Upload firmware for the specific environment
|
||||
> platformio run -e esp32dev --target upload
|
||||
|
||||
# Clean build files
|
||||
> platformio run --target clean
|
||||
@@ -0,0 +1,38 @@
|
||||
|
||||
This directory is intended for the project specific (private) libraries.
|
||||
PlatformIO will compile them to static libraries and link to executable file.
|
||||
|
||||
The source code of each library should be placed in separate directory, like
|
||||
"lib/private_lib/[here are source files]".
|
||||
|
||||
For example, see how can be organised `Foo` and `Bar` libraries:
|
||||
|
||||
|--lib
|
||||
| |--Bar
|
||||
| | |--docs
|
||||
| | |--examples
|
||||
| | |--src
|
||||
| | |- Bar.c
|
||||
| | |- Bar.h
|
||||
| |--Foo
|
||||
| | |- Foo.c
|
||||
| | |- Foo.h
|
||||
| |- readme.txt --> THIS FILE
|
||||
|- platformio.ini
|
||||
|--src
|
||||
|- main.c
|
||||
|
||||
Then in `src/main.c` you should use:
|
||||
|
||||
#include <Foo.h>
|
||||
#include <Bar.h>
|
||||
|
||||
// rest H/C/CPP code
|
||||
|
||||
PlatformIO will find your libraries automatically, configure preprocessor's
|
||||
include paths and build them.
|
||||
|
||||
See additional options for PlatformIO Library Dependency Finder `lib_*`:
|
||||
|
||||
http://docs.platformio.org/en/stable/projectconf.html#lib-install
|
||||
|
||||
@@ -0,0 +1,26 @@
|
||||
; PlatformIO Project Configuration File
|
||||
;
|
||||
; Build options: build flags, source filter, extra scripting
|
||||
; Upload options: custom port, speed and extra flags
|
||||
; Library options: dependencies, extra library storages
|
||||
;
|
||||
; Please visit documentation for the other options and examples
|
||||
; http://docs.platformio.org/en/stable/projectconf.html
|
||||
|
||||
[env:nano32]
|
||||
platform = espressif32
|
||||
framework = espidf
|
||||
board = nano32
|
||||
build_flags = -DCONFIG_WIFI_SSID=\"ESP_AP\" -DCONFIG_WIFI_PASSWORD=\"MYPASS\"
|
||||
|
||||
[env:espea32]
|
||||
platform = espressif32
|
||||
framework = espidf
|
||||
board = espea32
|
||||
build_flags = -DCONFIG_WIFI_SSID=\"ESP_AP\" -DCONFIG_WIFI_PASSWORD=\"MYPASS\"
|
||||
|
||||
[env:esp32dev]
|
||||
platform = espressif32
|
||||
framework = espidf
|
||||
board = esp32dev
|
||||
build_flags = -DCONFIG_WIFI_SSID=\"ESP_AP\" -DCONFIG_WIFI_PASSWORD=\"MYPASS\"
|
||||
@@ -0,0 +1,183 @@
|
||||
/* Uart Example
|
||||
|
||||
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
||||
|
||||
Unless required by applicable law or agreed to in writing, this
|
||||
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||||
CONDITIONS OF ANY KIND, either express or implied.
|
||||
*/
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <stdlib.h>
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "esp_system.h"
|
||||
#include "nvs_flash.h"
|
||||
#include "driver/uart.h"
|
||||
#include "freertos/queue.h"
|
||||
#include "esp_log.h"
|
||||
#include "soc/uart_struct.h"
|
||||
static const char *TAG = "uart_example";
|
||||
|
||||
/**
|
||||
* Test code brief
|
||||
* This example shows how to configure uart settings and install uart driver.
|
||||
*
|
||||
* uart_evt_test() is an example that read and write data on UART0, and handler some of the special events.
|
||||
* - port: UART0
|
||||
* - rx buffer: on
|
||||
* - tx buffer: on
|
||||
* - flow control: off
|
||||
* - event queue: on
|
||||
* - pin assignment: txd(default), rxd(default)
|
||||
*
|
||||
* uart_echo_test() is an example that read and write data on UART1, with hardware flow control turning on.
|
||||
* - port: UART1
|
||||
* - rx buffer: on
|
||||
* - tx buffer: off
|
||||
* - flow control: on
|
||||
* - event queue: off
|
||||
* - pin assignment: txd(io4), rxd(io5), rts(18), cts(19)
|
||||
*/
|
||||
|
||||
#define BUF_SIZE (1024)
|
||||
#define ECHO_TEST_TXD (4)
|
||||
#define ECHO_TEST_RXD (5)
|
||||
#define ECHO_TEST_RTS (18)
|
||||
#define ECHO_TEST_CTS (19)
|
||||
|
||||
QueueHandle_t uart0_queue;
|
||||
void uart_task(void *pvParameters)
|
||||
{
|
||||
int uart_num = (int) pvParameters;
|
||||
uart_event_t event;
|
||||
size_t buffered_size;
|
||||
uint8_t* dtmp = (uint8_t*) malloc(BUF_SIZE);
|
||||
for(;;) {
|
||||
//Waiting for UART event.
|
||||
if(xQueueReceive(uart0_queue, (void * )&event, (portTickType)portMAX_DELAY)) {
|
||||
ESP_LOGI(TAG, "uart[%d] event:", uart_num);
|
||||
switch(event.type) {
|
||||
//Event of UART receving data
|
||||
/*We'd better handler data event fast, there would be much more data events than
|
||||
other types of events. If we take too much time on data event, the queue might
|
||||
be full.
|
||||
in this example, we don't process data in event, but read data outside.*/
|
||||
case UART_DATA:
|
||||
uart_get_buffered_data_len(uart_num, &buffered_size);
|
||||
ESP_LOGI(TAG, "data, len: %d; buffered len: %d", event.size, buffered_size);
|
||||
break;
|
||||
//Event of HW FIFO overflow detected
|
||||
case UART_FIFO_OVF:
|
||||
ESP_LOGI(TAG, "hw fifo overflow\n");
|
||||
//If fifo overflow happened, you should consider adding flow control for your application.
|
||||
//We can read data out out the buffer, or directly flush the rx buffer.
|
||||
uart_flush(uart_num);
|
||||
break;
|
||||
//Event of UART ring buffer full
|
||||
case UART_BUFFER_FULL:
|
||||
ESP_LOGI(TAG, "ring buffer full\n");
|
||||
//If buffer full happened, you should consider encreasing your buffer size
|
||||
//We can read data out out the buffer, or directly flush the rx buffer.
|
||||
uart_flush(uart_num);
|
||||
break;
|
||||
//Event of UART RX break detected
|
||||
case UART_BREAK:
|
||||
ESP_LOGI(TAG, "uart rx break\n");
|
||||
break;
|
||||
//Event of UART parity check error
|
||||
case UART_PARITY_ERR:
|
||||
ESP_LOGI(TAG, "uart parity error\n");
|
||||
break;
|
||||
//Event of UART frame error
|
||||
case UART_FRAME_ERR:
|
||||
ESP_LOGI(TAG, "uart frame error\n");
|
||||
break;
|
||||
//UART_PATTERN_DET
|
||||
case UART_PATTERN_DET:
|
||||
ESP_LOGI(TAG, "uart pattern detected\n");
|
||||
break;
|
||||
//Others
|
||||
default:
|
||||
ESP_LOGI(TAG, "uart event type: %d\n", event.type);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
free(dtmp);
|
||||
dtmp = NULL;
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
void uart_evt_test()
|
||||
{
|
||||
int uart_num = UART_NUM_0;
|
||||
uart_config_t uart_config = {
|
||||
.baud_rate = 115200,
|
||||
.data_bits = UART_DATA_8_BITS,
|
||||
.parity = UART_PARITY_DISABLE,
|
||||
.stop_bits = UART_STOP_BITS_1,
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
||||
.rx_flow_ctrl_thresh = 122,
|
||||
};
|
||||
//Set UART parameters
|
||||
uart_param_config(uart_num, &uart_config);
|
||||
//Set UART log level
|
||||
esp_log_level_set(TAG, ESP_LOG_INFO);
|
||||
//Install UART driver, and get the queue.
|
||||
uart_driver_install(uart_num, BUF_SIZE * 2, BUF_SIZE * 2, 10, &uart0_queue, 0);
|
||||
//Set UART pins,(-1: default pin, no change.)
|
||||
//For UART0, we can just use the default pins.
|
||||
//uart_set_pin(uart_num, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
|
||||
//Set uart pattern detect function.
|
||||
uart_enable_pattern_det_intr(uart_num, '+', 3, 10000, 10, 10);
|
||||
//Create a task to handler UART event from ISR
|
||||
xTaskCreate(uart_task, "uart_task", 2048, (void*)uart_num, 12, NULL);
|
||||
//process data
|
||||
uint8_t* data = (uint8_t*) malloc(BUF_SIZE);
|
||||
do {
|
||||
int len = uart_read_bytes(uart_num, data, BUF_SIZE, 100 / portTICK_RATE_MS);
|
||||
if(len > 0) {
|
||||
ESP_LOGI(TAG, "uart read : %d", len);
|
||||
uart_write_bytes(uart_num, (const char*)data, len);
|
||||
}
|
||||
} while(1);
|
||||
}
|
||||
|
||||
//an example of echo test with hardware flow control on UART1
|
||||
void uart_echo_test()
|
||||
{
|
||||
int uart_num = UART_NUM_1;
|
||||
uart_config_t uart_config = {
|
||||
.baud_rate = 115200,
|
||||
.data_bits = UART_DATA_8_BITS,
|
||||
.parity = UART_PARITY_DISABLE,
|
||||
.stop_bits = UART_STOP_BITS_1,
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_CTS_RTS,
|
||||
.rx_flow_ctrl_thresh = 122,
|
||||
};
|
||||
//Configure UART1 parameters
|
||||
uart_param_config(uart_num, &uart_config);
|
||||
//Set UART1 pins(TX: IO4, RX: I05, RTS: IO18, CTS: IO19)
|
||||
uart_set_pin(uart_num, ECHO_TEST_TXD, ECHO_TEST_RXD, ECHO_TEST_RTS, ECHO_TEST_CTS);
|
||||
//Install UART driver( We don't need an event queue here)
|
||||
//In this example we don't even use a buffer for sending data.
|
||||
uart_driver_install(uart_num, BUF_SIZE * 2, 0, 0, NULL, 0);
|
||||
|
||||
uint8_t* data = (uint8_t*) malloc(BUF_SIZE);
|
||||
while(1) {
|
||||
//Read data from UART
|
||||
int len = uart_read_bytes(uart_num, data, BUF_SIZE, 20 / portTICK_RATE_MS);
|
||||
//Write data back to UART
|
||||
uart_write_bytes(uart_num, (const char*) data, len);
|
||||
}
|
||||
}
|
||||
|
||||
void app_main()
|
||||
{
|
||||
//A uart read/write example without event queue;
|
||||
xTaskCreate(uart_echo_test, "uart_echo_test", 1024, NULL, 10, NULL);
|
||||
|
||||
//A uart example with event queue.
|
||||
uart_evt_test();
|
||||
}
|
||||
@@ -0,0 +1,98 @@
|
||||
/*
|
||||
*
|
||||
* Automatically generated file; DO NOT EDIT.
|
||||
* Espressif IoT Development Framework Configuration
|
||||
*
|
||||
*/
|
||||
#define CONFIG_ESP32_PHY_MAX_TX_POWER 20
|
||||
#define CONFIG_PHY_ENABLED 1
|
||||
#define CONFIG_TRACEMEM_RESERVE_DRAM 0x0
|
||||
#define CONFIG_ESPTOOLPY_FLASHFREQ "40m"
|
||||
#define CONFIG_NEWLIB_STDOUT_ADDCR 1
|
||||
#define CONFIG_TASK_WDT_CHECK_IDLE_TASK 1
|
||||
#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB"
|
||||
#define CONFIG_ETHERNET 1
|
||||
#define CONFIG_INT_WDT 1
|
||||
#define CONFIG_ESPTOOLPY_FLASHFREQ_40M 1
|
||||
#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO 1
|
||||
#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1
|
||||
#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1
|
||||
#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1
|
||||
#define CONFIG_BT_RESERVE_DRAM 0x10000
|
||||
#define CONFIG_ESP32_PANIC_PRINT_REBOOT 1
|
||||
#define CONFIG_CONSOLE_UART_BAUDRATE 115200
|
||||
#define CONFIG_LWIP_MAX_SOCKETS 10
|
||||
#define CONFIG_EMAC_TASK_PRIORITY 20
|
||||
#define CONFIG_ULP_COPROC_RESERVE_MEM 0
|
||||
#define CONFIG_ESPTOOLPY_BAUD 115200
|
||||
#define CONFIG_INT_WDT_CHECK_CPU1 1
|
||||
#define CONFIG_ESPTOOLPY_AFTER_RESET 1
|
||||
#define CONFIG_TOOLPREFIX "xtensa-esp32-elf-"
|
||||
#define CONFIG_CONSOLE_UART_NUM 0
|
||||
#define CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC 1
|
||||
#define CONFIG_ESPTOOLPY_BAUD_115200B 1
|
||||
#define CONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX 0
|
||||
#define CONFIG_CONSOLE_UART_DEFAULT 1
|
||||
#define CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN 16384
|
||||
#define CONFIG_ESPTOOLPY_FLASHSIZE_DETECT 1
|
||||
#define CONFIG_MBEDTLS_MPI_USE_INTERRUPT 1
|
||||
#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE 1
|
||||
#define CONFIG_TASK_WDT 1
|
||||
#define CONFIG_MAIN_TASK_STACK_SIZE 4096
|
||||
#define CONFIG_TASK_WDT_TIMEOUT_S 5
|
||||
#define CONFIG_INT_WDT_TIMEOUT_MS 300
|
||||
#define CONFIG_ESPTOOLPY_FLASHMODE "dio"
|
||||
#define CONFIG_BTC_TASK_STACK_SIZE 3072
|
||||
#define CONFIG_ESPTOOLPY_BEFORE "default_reset"
|
||||
#define CONFIG_LOG_DEFAULT_LEVEL 3
|
||||
#define CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION 1
|
||||
#define CONFIG_SPI_FLASH_ENABLE_COUNTERS 1
|
||||
#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER 20
|
||||
#define CONFIG_DMA_RX_BUF_NUM 10
|
||||
#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1
|
||||
#define CONFIG_TCP_SYNMAXRTX 6
|
||||
#define CONFIG_PYTHON "python"
|
||||
#define CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1 1
|
||||
#define CONFIG_ESPTOOLPY_COMPRESSED 1
|
||||
#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv"
|
||||
#define CONFIG_LWIP_DHCP_MAX_NTP_SERVERS 1
|
||||
#define CONFIG_PARTITION_TABLE_SINGLE_APP 1
|
||||
#define CONFIG_WIFI_ENABLED 1
|
||||
#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE 4096
|
||||
#define CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY 0
|
||||
#define CONFIG_PHY_DATA_OFFSET 0xf000
|
||||
#define CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET 0x10000
|
||||
#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 1
|
||||
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ 240
|
||||
#define CONFIG_MBEDTLS_HARDWARE_AES 1
|
||||
#define CONFIG_FREERTOS_HZ 100
|
||||
#define CONFIG_LOG_COLORS 1
|
||||
#define CONFIG_FREERTOS_ASSERT_FAIL_ABORT 1
|
||||
#define CONFIG_MONITOR_BAUD_115200B 1
|
||||
#define CONFIG_LOG_BOOTLOADER_LEVEL 3
|
||||
#define CONFIG_ESPTOOLPY_BEFORE_RESET 1
|
||||
#define CONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
|
||||
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_240 1
|
||||
#define CONFIG_TCP_MAXRTX 12
|
||||
#define CONFIG_ESPTOOLPY_AFTER "hard_reset"
|
||||
#define CONFIG_DMA_TX_BUF_NUM 10
|
||||
#define CONFIG_ESP32_DEBUG_OCDAWARE 1
|
||||
#define CONFIG_FREERTOS_BREAK_ON_SCHEDULER_START_JTAG 1
|
||||
#define CONFIG_BT_ENABLED 1
|
||||
#define CONFIG_MONITOR_BAUD 115200
|
||||
#define CONFIG_MBEDTLS_HARDWARE_SHA 1
|
||||
#define CONFIG_FREERTOS_CORETIMER_0 1
|
||||
#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv"
|
||||
#define CONFIG_MBEDTLS_HAVE_TIME 1
|
||||
#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1
|
||||
#define CONFIG_FREERTOS_ISR_STACKSIZE 1536
|
||||
#define CONFIG_OPENSSL_ASSERT_DO_NOTHING 1
|
||||
#define CONFIG_OPTIMIZATION_LEVEL_DEBUG 1
|
||||
#define CONFIG_ESP32_PHY_AUTO_INIT 1
|
||||
#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE 32
|
||||
#define CONFIG_ESP32_WIFI_RX_BUFFER_NUM 25
|
||||
#define CONFIG_APP_OFFSET 0x10000
|
||||
#define CONFIG_MEMMAP_SMP 1
|
||||
#define CONFIG_MBEDTLS_HARDWARE_MPI 1
|
||||
#define CONFIG_MONITOR_BAUD_OTHER_VAL 115200
|
||||
#define CONFIG_ESPTOOLPY_PORT "/dev/ttyUSB0"
|
||||
Reference in New Issue
Block a user