Update build script for ESP-IDF v3.0
This commit is contained in:
Valerii Koval
@@ -14,15 +14,37 @@
|
||||
#include "esp_log.h"
|
||||
#include "esp_vfs_fat.h"
|
||||
#include "driver/sdmmc_host.h"
|
||||
#include "driver/sdmmc_defs.h"
|
||||
#include "driver/sdspi_host.h"
|
||||
#include "sdmmc_cmd.h"
|
||||
|
||||
static const char* TAG = "example";
|
||||
static const char *TAG = "example";
|
||||
|
||||
// This example can use SDMMC and SPI peripherals to communicate with SD card.
|
||||
// By default, SDMMC peripheral is used.
|
||||
// To enable SPI mode, uncomment the following line:
|
||||
|
||||
// #define USE_SPI_MODE
|
||||
|
||||
// When testing SD and SPI modes, keep in mind that once the card has been
|
||||
// initialized in SPI mode, it can not be reinitialized in SD mode without
|
||||
// toggling power to the card.
|
||||
|
||||
#ifdef USE_SPI_MODE
|
||||
// Pin mapping when using SPI mode.
|
||||
// With this mapping, SD card can be used both in SPI and 1-line SD mode.
|
||||
// Note that a pull-up on CS line is required in SD mode.
|
||||
#define PIN_NUM_MISO 2
|
||||
#define PIN_NUM_MOSI 15
|
||||
#define PIN_NUM_CLK 14
|
||||
#define PIN_NUM_CS 13
|
||||
#endif //USE_SPI_MODE
|
||||
|
||||
void app_main(void)
|
||||
{
|
||||
ESP_LOGI(TAG, "Initializing SD card");
|
||||
|
||||
#ifndef USE_SPI_MODE
|
||||
ESP_LOGI(TAG, "Using SDMMC peripheral");
|
||||
sdmmc_host_t host = SDMMC_HOST_DEFAULT();
|
||||
|
||||
// To use 1-line SD mode, uncomment the following line:
|
||||
@@ -32,9 +54,31 @@ void app_main(void)
|
||||
// Modify slot_config.gpio_cd and slot_config.gpio_wp if your board has these signals.
|
||||
sdmmc_slot_config_t slot_config = SDMMC_SLOT_CONFIG_DEFAULT();
|
||||
|
||||
// GPIOs 15, 2, 4, 12, 13 should have external 10k pull-ups.
|
||||
// Internal pull-ups are not sufficient. However, enabling internal pull-ups
|
||||
// does make a difference some boards, so we do that here.
|
||||
gpio_set_pull_mode(15, GPIO_PULLUP_ONLY); // CMD, needed in 4- and 1- line modes
|
||||
gpio_set_pull_mode(2, GPIO_PULLUP_ONLY); // D0, needed in 4- and 1-line modes
|
||||
gpio_set_pull_mode(4, GPIO_PULLUP_ONLY); // D1, needed in 4-line mode only
|
||||
gpio_set_pull_mode(12, GPIO_PULLUP_ONLY); // D2, needed in 4-line mode only
|
||||
gpio_set_pull_mode(13, GPIO_PULLUP_ONLY); // D3, needed in 4- and 1-line modes
|
||||
|
||||
#else
|
||||
ESP_LOGI(TAG, "Using SPI peripheral");
|
||||
|
||||
sdmmc_host_t host = SDSPI_HOST_DEFAULT();
|
||||
sdspi_slot_config_t slot_config = SDSPI_SLOT_CONFIG_DEFAULT();
|
||||
slot_config.gpio_miso = PIN_NUM_MISO;
|
||||
slot_config.gpio_mosi = PIN_NUM_MOSI;
|
||||
slot_config.gpio_sck = PIN_NUM_CLK;
|
||||
slot_config.gpio_cs = PIN_NUM_CS;
|
||||
// This initializes the slot without card detect (CD) and write protect (WP) signals.
|
||||
// Modify slot_config.gpio_cd and slot_config.gpio_wp if your board has these signals.
|
||||
#endif //USE_SPI_MODE
|
||||
|
||||
// Options for mounting the filesystem.
|
||||
// If format_if_mount_failed is set to true, SD card will be partitioned and formatted
|
||||
// in case when mounting fails.
|
||||
// If format_if_mount_failed is set to true, SD card will be partitioned and
|
||||
// formatted in case when mounting fails.
|
||||
esp_vfs_fat_sdmmc_mount_config_t mount_config = {
|
||||
.format_if_mount_failed = false,
|
||||
.max_files = 5
|
||||
@@ -46,11 +90,14 @@ void app_main(void)
|
||||
// production applications.
|
||||
sdmmc_card_t* card;
|
||||
esp_err_t ret = esp_vfs_fat_sdmmc_mount("/sdcard", &host, &slot_config, &mount_config, &card);
|
||||
|
||||
if (ret != ESP_OK) {
|
||||
if (ret == ESP_FAIL) {
|
||||
ESP_LOGE(TAG, "Failed to mount filesystem. If you want the card to be formatted, set format_if_mount_failed = true.");
|
||||
ESP_LOGE(TAG, "Failed to mount filesystem. "
|
||||
"If you want the card to be formatted, set format_if_mount_failed = true.");
|
||||
} else {
|
||||
ESP_LOGE(TAG, "Failed to initialize the card (%d). Make sure SD card lines have pull-up resistors in place.", ret);
|
||||
ESP_LOGE(TAG, "Failed to initialize the card (%d). "
|
||||
"Make sure SD card lines have pull-up resistors in place.", ret);
|
||||
}
|
||||
return;
|
||||
}
|
||||
@@ -101,7 +148,7 @@ void app_main(void)
|
||||
}
|
||||
ESP_LOGI(TAG, "Read from file: '%s'", line);
|
||||
|
||||
// All done, unmount partition and disable SDMMC host peripheral
|
||||
// All done, unmount partition and disable SDMMC or SPI peripheral
|
||||
esp_vfs_fat_sdmmc_unmount();
|
||||
ESP_LOGI(TAG, "Card unmounted");
|
||||
}
|
||||
}
|
||||
|
||||
@@ -6,120 +6,218 @@
|
||||
*/
|
||||
#define CONFIG_GATTC_ENABLE 1
|
||||
#define CONFIG_ESP32_PHY_MAX_TX_POWER 20
|
||||
#define CONFIG_PHY_ENABLED 1
|
||||
#define CONFIG_TRACEMEM_RESERVE_DRAM 0x0
|
||||
#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16
|
||||
#define CONFIG_BLE_SMP_ENABLE 1
|
||||
#define CONFIG_FATFS_LFN_NONE 1
|
||||
#define CONFIG_TCP_RECVMBOX_SIZE 6
|
||||
#define CONFIG_FATFS_CODEPAGE_437 1
|
||||
#define CONFIG_LWIP_ETHARP_TRUST_IP_MAC 1
|
||||
#define CONFIG_TCP_WND_DEFAULT 5744
|
||||
#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1
|
||||
#define CONFIG_IPC_TASK_STACK_SIZE 1024
|
||||
#define CONFIG_FATFS_PER_FILE_CACHE 1
|
||||
#define CONFIG_ESPTOOLPY_FLASHFREQ "40m"
|
||||
#define CONFIG_NEWLIB_STDOUT_ADDCR 1
|
||||
#define CONFIG_TASK_WDT_CHECK_IDLE_TASK 1
|
||||
#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1
|
||||
#define CONFIG_UDP_RECVMBOX_SIZE 6
|
||||
#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0
|
||||
#define CONFIG_MBEDTLS_AES_C 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1
|
||||
#define CONFIG_MBEDTLS_GCM_C 1
|
||||
#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB"
|
||||
#define CONFIG_HEAP_POISONING_DISABLED 1
|
||||
#define CONFIG_SPIFFS_CACHE_WR 1
|
||||
#define CONFIG_BROWNOUT_DET_LVL_SEL_0 1
|
||||
#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER 1
|
||||
#define CONFIG_ETHERNET 1
|
||||
#define CONFIG_SPIFFS_CACHE 1
|
||||
#define CONFIG_INT_WDT 1
|
||||
#define CONFIG_MBEDTLS_SSL_PROTO_TLS1 1
|
||||
#define CONFIG_MBEDTLS_ECDSA_C 1
|
||||
#define CONFIG_ESPTOOLPY_FLASHFREQ_40M 1
|
||||
#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO 1
|
||||
#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1
|
||||
#define CONFIG_AWS_IOT_MQTT_PORT 8883
|
||||
#define CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE 0
|
||||
#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1
|
||||
#define CONFIG_MBEDTLS_ECDH_C 1
|
||||
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1
|
||||
#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM 10
|
||||
#define CONFIG_MBEDTLS_SSL_ALPN 1
|
||||
#define CONFIG_MBEDTLS_PEM_WRITE_C 1
|
||||
#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1
|
||||
#define CONFIG_BT_RESERVE_DRAM 0x10000
|
||||
#define CONFIG_FATFS_FS_LOCK 0
|
||||
#define CONFIG_IP_LOST_TIMER_INTERVAL 120
|
||||
#define CONFIG_SPIFFS_META_LENGTH 4
|
||||
#define CONFIG_ESP32_PANIC_PRINT_REBOOT 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1
|
||||
#define CONFIG_CONSOLE_UART_BAUDRATE 115200
|
||||
#define CONFIG_LWIP_MAX_SOCKETS 10
|
||||
#define CONFIG_LWIP_NETIF_LOOPBACK 1
|
||||
#define CONFIG_EMAC_TASK_PRIORITY 20
|
||||
#define CONFIG_TIMER_TASK_STACK_DEPTH 2048
|
||||
#define CONFIG_FATFS_CODEPAGE 1
|
||||
#define CONFIG_TCP_MSS 1436
|
||||
#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1
|
||||
#define CONFIG_FATFS_CODEPAGE 437
|
||||
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_160 1
|
||||
#define CONFIG_ULP_COPROC_RESERVE_MEM 0
|
||||
#define CONFIG_LWIP_MAX_UDP_PCBS 16
|
||||
#define CONFIG_ESPTOOLPY_BAUD 115200
|
||||
#define CONFIG_INT_WDT_CHECK_CPU1 1
|
||||
#define CONFIG_ADC_CAL_LUT_ENABLE 1
|
||||
#define CONFIG_FLASHMODE_DIO 1
|
||||
#define CONFIG_ESPTOOLPY_AFTER_RESET 1
|
||||
#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED 1
|
||||
#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8
|
||||
#define CONFIG_TOOLPREFIX "xtensa-esp32-elf-"
|
||||
#define CONFIG_MBEDTLS_ECP_C 1
|
||||
#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1024
|
||||
#define CONFIG_ESP32_WIFI_AMPDU_ENABLED 1
|
||||
#define CONFIG_MBEDTLS_RC4_DISABLED 1
|
||||
#define CONFIG_CONSOLE_UART_NUM 0
|
||||
#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE 1
|
||||
#define CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC 1
|
||||
#define CONFIG_ESPTOOLPY_BAUD_115200B 1
|
||||
#define CONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX 0
|
||||
#define CONFIG_TCP_OVERSIZE_MSS 1
|
||||
#define CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS 1
|
||||
#define CONFIG_CONSOLE_UART_DEFAULT 1
|
||||
#define CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN 16384
|
||||
#define CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS 4
|
||||
#define CONFIG_ESPTOOLPY_FLASHSIZE_DETECT 1
|
||||
#define CONFIG_TIMER_TASK_STACK_SIZE 3584
|
||||
#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE 1
|
||||
#define CONFIG_BTDM_CONTROLLER_RUN_CPU 0
|
||||
#define CONFIG_TCPIP_TASK_STACK_SIZE 2560
|
||||
#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1
|
||||
#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60
|
||||
#define CONFIG_SPIFFS_USE_MAGIC 1
|
||||
#define CONFIG_TCPIP_TASK_STACK_SIZE 2048
|
||||
#define CONFIG_BLUEDROID_PINNED_TO_CORE_0 1
|
||||
#define CONFIG_TASK_WDT 1
|
||||
#define CONFIG_MAIN_TASK_STACK_SIZE 4096
|
||||
#define CONFIG_MAIN_TASK_STACK_SIZE 3584
|
||||
#define CONFIG_SPIFFS_PAGE_CHECK 1
|
||||
#define CONFIG_LWIP_MAX_ACTIVE_TCP 16
|
||||
#define CONFIG_TASK_WDT_TIMEOUT_S 5
|
||||
#define CONFIG_INT_WDT_TIMEOUT_MS 300
|
||||
#define CONFIG_ESPTOOLPY_FLASHMODE "dio"
|
||||
#define CONFIG_BTC_TASK_STACK_SIZE 3072
|
||||
#define CONFIG_BLUEDROID_ENABLED 1
|
||||
#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1
|
||||
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1
|
||||
#define CONFIG_ESPTOOLPY_BEFORE "default_reset"
|
||||
#define CONFIG_LOG_DEFAULT_LEVEL 3
|
||||
#define CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION 1
|
||||
#define CONFIG_TIMER_QUEUE_LENGTH 10
|
||||
#define CONFIG_MAKE_WARN_UNDEFINED_VARIABLES 1
|
||||
#define CONFIG_FATFS_TIMEOUT_MS 10000
|
||||
#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM 32
|
||||
#define CONFIG_MBEDTLS_CCM_C 1
|
||||
#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER 20
|
||||
#define CONFIG_ESP32_RTC_CLK_CAL_CYCLES 1024
|
||||
#define CONFIG_ESP32_WIFI_TX_BA_WIN 6
|
||||
#define CONFIG_ESP32_WIFI_NVS_ENABLED 1
|
||||
#define CONFIG_AWS_IOT_SDK 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1
|
||||
#define CONFIG_LIBSODIUM_USE_MBEDTLS_SHA 1
|
||||
#define CONFIG_DMA_RX_BUF_NUM 10
|
||||
#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1
|
||||
#define CONFIG_TCP_SYNMAXRTX 6
|
||||
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1
|
||||
#define CONFIG_PYTHON "python"
|
||||
#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1
|
||||
#define CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1 1
|
||||
#define CONFIG_ESPTOOLPY_COMPRESSED 1
|
||||
#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv"
|
||||
#define CONFIG_TCP_SND_BUF_DEFAULT 5744
|
||||
#define CONFIG_LWIP_DHCP_MAX_NTP_SERVERS 1
|
||||
#define CONFIG_TCP_MSL 60000
|
||||
#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_1 1
|
||||
#define CONFIG_LWIP_SO_REUSE_RXTOALL 1
|
||||
#define CONFIG_PARTITION_TABLE_SINGLE_APP 1
|
||||
#define CONFIG_WIFI_ENABLED 1
|
||||
#define CONFIG_ESP32_WIFI_RX_BA_WIN 6
|
||||
#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1
|
||||
#define CONFIG_SPIFFS_USE_MTIME 1
|
||||
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1
|
||||
#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1
|
||||
#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE 4096
|
||||
#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE 2048
|
||||
#define CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V 1
|
||||
#define CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY 2000
|
||||
#define CONFIG_BROWNOUT_DET_LVL 0
|
||||
#define CONFIG_MBEDTLS_PEM_PARSE_C 1
|
||||
#define CONFIG_SPIFFS_GC_MAX_RUNS 10
|
||||
#define CONFIG_ESP32_APPTRACE_DEST_NONE 1
|
||||
#define CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET 0x10000
|
||||
#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1
|
||||
#define CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA 1
|
||||
#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM 32
|
||||
#define CONFIG_FATFS_CODEPAGE_ASCII 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1
|
||||
#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 1
|
||||
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ 160
|
||||
#define CONFIG_MBEDTLS_HARDWARE_AES 1
|
||||
#define CONFIG_FREERTOS_HZ 100
|
||||
#define CONFIG_LOG_COLORS 1
|
||||
#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE 1
|
||||
#define CONFIG_STACK_CHECK_NONE 1
|
||||
#define CONFIG_ADC_CAL_EFUSE_TP_ENABLE 1
|
||||
#define CONFIG_FREERTOS_ASSERT_FAIL_ABORT 1
|
||||
#define CONFIG_ESP32_XTAL_FREQ 0
|
||||
#define CONFIG_BROWNOUT_DET 1
|
||||
#define CONFIG_ESP32_XTAL_FREQ 40
|
||||
#define CONFIG_MONITOR_BAUD_115200B 1
|
||||
#define CONFIG_LOG_BOOTLOADER_LEVEL 3
|
||||
#define CONFIG_MBEDTLS_TLS_ENABLED 1
|
||||
#define CONFIG_LWIP_MAX_RAW_PCBS 16
|
||||
#define CONFIG_SMP_ENABLE 1
|
||||
#define CONFIG_MBEDTLS_SSL_SESSION_TICKETS 1
|
||||
#define CONFIG_SPIFFS_MAX_PARTITIONS 3
|
||||
#define CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_0 1
|
||||
#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1
|
||||
#define CONFIG_ESPTOOLPY_BEFORE_RESET 1
|
||||
#define CONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
|
||||
#define CONFIG_ESP32_XTAL_FREQ_AUTO 1
|
||||
#define CONFIG_SPIFFS_OBJ_NAME_LEN 32
|
||||
#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT 5
|
||||
#define CONFIG_TCPIP_RECVMBOX_SIZE 32
|
||||
#define CONFIG_TCP_MAXRTX 12
|
||||
#define CONFIG_ESPTOOLPY_AFTER "hard_reset"
|
||||
#define CONFIG_LWIP_SO_REUSE 1
|
||||
#define CONFIG_ESP32_XTAL_FREQ_40 1
|
||||
#define CONFIG_DMA_TX_BUF_NUM 10
|
||||
#define CONFIG_LWIP_MAX_LISTENING_TCP 16
|
||||
#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1
|
||||
#define CONFIG_WL_SECTOR_SIZE 4096
|
||||
#define CONFIG_ESP32_DEBUG_OCDAWARE 1
|
||||
#define CONFIG_TIMER_TASK_PRIORITY 1
|
||||
#define CONFIG_MBEDTLS_TLS_CLIENT 1
|
||||
#define CONFIG_BTDM_CONTROLLER_HCI_MODE_VHCI 1
|
||||
#define CONFIG_BT_ENABLED 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1
|
||||
#define CONFIG_MONITOR_BAUD 115200
|
||||
#define CONFIG_FREERTOS_CORETIMER_0 1
|
||||
#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv"
|
||||
#define CONFIG_MBEDTLS_HAVE_TIME 1
|
||||
#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1
|
||||
#define CONFIG_TCP_QUEUE_OOSEQ 1
|
||||
#define CONFIG_GATTS_ENABLE 1
|
||||
#define CONFIG_ADC_CAL_EFUSE_VREF_ENABLE 1
|
||||
#define CONFIG_MBEDTLS_TLS_SERVER 1
|
||||
#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1
|
||||
#define CONFIG_FREERTOS_ISR_STACKSIZE 1536
|
||||
#define CONFIG_OPENSSL_ASSERT_DO_NOTHING 1
|
||||
#define CONFIG_AWS_IOT_MQTT_HOST ""
|
||||
#define CONFIG_WL_SECTOR_SIZE_4096 1
|
||||
#define CONFIG_OPTIMIZATION_LEVEL_DEBUG 1
|
||||
#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1
|
||||
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1
|
||||
#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE 32
|
||||
#define CONFIG_BT_ACL_CONNECTIONS 4
|
||||
#define CONFIG_FATFS_MAX_LFN 255
|
||||
#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE 1
|
||||
#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED 1
|
||||
#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8
|
||||
#define CONFIG_APP_OFFSET 0x10000
|
||||
#define CONFIG_MEMMAP_SMP 1
|
||||
#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1
|
||||
#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1
|
||||
#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 1
|
||||
#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072
|
||||
#define CONFIG_MONITOR_BAUD_OTHER_VAL 115200
|
||||
#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1
|
||||
#define CONFIG_ESPTOOLPY_PORT "/dev/ttyUSB0"
|
||||
#define CONFIG_OPTIMIZATION_LEVEL_RELEASE 1
|
||||
#define CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS 1
|
||||
#define CONFIG_BLUEDROID_PINNED_TO_CORE 0
|
||||
|
||||
Reference in New Issue
Block a user