Revert get settings from boards.json for HybridCompile
Refactor ESP-IDF configuration handling to improve clarity and maintainability. Remove unused functions and streamline flash configuration logic.
This commit is contained in:
Jason2866
+27
-331
@@ -78,7 +78,7 @@ config = env.GetProjectConfig()
|
|||||||
board = env.BoardConfig()
|
board = env.BoardConfig()
|
||||||
mcu = board.get("build.mcu", "esp32")
|
mcu = board.get("build.mcu", "esp32")
|
||||||
flash_speed = board.get("build.f_flash", "40000000L")
|
flash_speed = board.get("build.f_flash", "40000000L")
|
||||||
flash_frequency = str(flash_speed.replace("000000L", ""))
|
flash_frequency = str(flash_speed.replace("000000L", "m"))
|
||||||
flash_mode = board.get("build.flash_mode", "dio")
|
flash_mode = board.get("build.flash_mode", "dio")
|
||||||
idf_variant = mcu.lower()
|
idf_variant = mcu.lower()
|
||||||
flag_custom_sdkonfig = False
|
flag_custom_sdkonfig = False
|
||||||
@@ -218,29 +218,6 @@ if config.has_option("env:"+env["PIOENV"], "custom_sdkconfig"):
|
|||||||
if "espidf.custom_sdkconfig" in board:
|
if "espidf.custom_sdkconfig" in board:
|
||||||
flag_custom_sdkonfig = True
|
flag_custom_sdkonfig = True
|
||||||
|
|
||||||
|
|
||||||
# Check for board-specific configurations that require sdkconfig generation
|
|
||||||
def has_board_specific_config():
|
|
||||||
"""Check if board has configuration that needs to be applied to sdkconfig."""
|
|
||||||
# Check for PSRAM support
|
|
||||||
extra_flags = board.get("build.extra_flags", [])
|
|
||||||
has_psram = any("-DBOARD_HAS_PSRAM" in flag for flag in extra_flags)
|
|
||||||
|
|
||||||
# Check for special memory types
|
|
||||||
memory_type = None
|
|
||||||
build_section = board.get("build", {})
|
|
||||||
arduino_section = build_section.get("arduino", {})
|
|
||||||
if "memory_type" in arduino_section:
|
|
||||||
memory_type = arduino_section["memory_type"]
|
|
||||||
elif "memory_type" in build_section:
|
|
||||||
memory_type = build_section["memory_type"]
|
|
||||||
has_special_memory = memory_type and ("opi" in memory_type.lower())
|
|
||||||
|
|
||||||
return has_psram or has_special_memory
|
|
||||||
|
|
||||||
if has_board_specific_config():
|
|
||||||
flag_custom_sdkonfig = True
|
|
||||||
|
|
||||||
def HandleArduinoIDFsettings(env):
|
def HandleArduinoIDFsettings(env):
|
||||||
"""
|
"""
|
||||||
Handles Arduino IDF settings configuration with custom sdkconfig support.
|
Handles Arduino IDF settings configuration with custom sdkconfig support.
|
||||||
@@ -307,322 +284,48 @@ def HandleArduinoIDFsettings(env):
|
|||||||
return line.split("=")[0]
|
return line.split("=")[0]
|
||||||
return None
|
return None
|
||||||
|
|
||||||
def generate_board_specific_config():
|
|
||||||
"""Generate board-specific sdkconfig settings from board.json manifest."""
|
|
||||||
board_config_flags = []
|
|
||||||
|
|
||||||
# Handle memory type configuration with platformio.ini override support
|
|
||||||
# Priority: platformio.ini > board.json manifest
|
|
||||||
memory_type = None
|
|
||||||
|
|
||||||
# Check for memory_type override in platformio.ini
|
|
||||||
if hasattr(env, 'GetProjectOption'):
|
|
||||||
try:
|
|
||||||
memory_type = env.GetProjectOption("board_build.memory_type", None)
|
|
||||||
except:
|
|
||||||
pass
|
|
||||||
|
|
||||||
# Fallback to board.json manifest
|
|
||||||
if not memory_type:
|
|
||||||
build_section = board.get("build", {})
|
|
||||||
arduino_section = build_section.get("arduino", {})
|
|
||||||
if "memory_type" in arduino_section:
|
|
||||||
memory_type = arduino_section["memory_type"]
|
|
||||||
elif "memory_type" in build_section:
|
|
||||||
memory_type = build_section["memory_type"]
|
|
||||||
|
|
||||||
flash_memory_type = None
|
|
||||||
psram_memory_type = None
|
|
||||||
if memory_type:
|
|
||||||
parts = memory_type.split("_")
|
|
||||||
if len(parts) == 2:
|
|
||||||
flash_memory_type, psram_memory_type = parts
|
|
||||||
else:
|
|
||||||
flash_memory_type = memory_type
|
|
||||||
|
|
||||||
# Check for additional flash configuration indicators
|
|
||||||
boot_mode = board.get("build", {}).get("boot", None)
|
|
||||||
flash_mode = board.get("build", {}).get("flash_mode", None)
|
|
||||||
|
|
||||||
# Override flash_memory_type if boot mode indicates OPI
|
|
||||||
if boot_mode == "opi" or flash_mode in ["dout", "opi"]:
|
|
||||||
if not flash_memory_type or flash_memory_type.lower() != "opi":
|
|
||||||
flash_memory_type = "opi"
|
|
||||||
print(f"Info: Detected OPI Flash via boot_mode='{boot_mode}' or flash_mode='{flash_mode}'")
|
|
||||||
|
|
||||||
# Set CPU frequency with platformio.ini override support
|
|
||||||
# Priority: platformio.ini > board.json manifest
|
|
||||||
f_cpu = None
|
|
||||||
if hasattr(env, 'GetProjectOption'):
|
|
||||||
# Check for board_build.f_cpu override in platformio.ini
|
|
||||||
try:
|
|
||||||
f_cpu = env.GetProjectOption("board_build.f_cpu", None)
|
|
||||||
except:
|
|
||||||
pass
|
|
||||||
|
|
||||||
# Fallback to board.json manifest
|
|
||||||
if not f_cpu:
|
|
||||||
f_cpu = board.get("build.f_cpu", None)
|
|
||||||
|
|
||||||
if f_cpu:
|
|
||||||
cpu_freq = str(f_cpu).replace("000000L", "")
|
|
||||||
board_config_flags.append(f"CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ={cpu_freq}")
|
|
||||||
# Disable other CPU frequency options and enable the specific one
|
|
||||||
common_cpu_freqs = ["80", "160", "240"]
|
|
||||||
for freq in common_cpu_freqs:
|
|
||||||
if freq != cpu_freq:
|
|
||||||
if mcu == "esp32":
|
|
||||||
board_config_flags.append(f"# CONFIG_ESP32_DEFAULT_CPU_FREQ_{freq} is not set")
|
|
||||||
elif mcu in ["esp32s2", "esp32s3"]:
|
|
||||||
board_config_flags.append(f"# CONFIG_ESP32S2_DEFAULT_CPU_FREQ_{freq} is not set" if mcu == "esp32s2" else f"# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_{freq} is not set")
|
|
||||||
elif mcu in ["esp32c2", "esp32c3", "esp32c6"]:
|
|
||||||
board_config_flags.append(f"# CONFIG_ESP32C3_DEFAULT_CPU_FREQ_{freq} is not set")
|
|
||||||
# Enable the specific CPU frequency
|
|
||||||
if mcu == "esp32":
|
|
||||||
board_config_flags.append(f"CONFIG_ESP32_DEFAULT_CPU_FREQ_{cpu_freq}=y")
|
|
||||||
elif mcu == "esp32s2":
|
|
||||||
board_config_flags.append(f"CONFIG_ESP32S2_DEFAULT_CPU_FREQ_{cpu_freq}=y")
|
|
||||||
elif mcu == "esp32s3":
|
|
||||||
board_config_flags.append(f"CONFIG_ESP32S3_DEFAULT_CPU_FREQ_{cpu_freq}=y")
|
|
||||||
elif mcu in ["esp32c2", "esp32c3", "esp32c6"]:
|
|
||||||
board_config_flags.append(f"CONFIG_ESP32C3_DEFAULT_CPU_FREQ_{cpu_freq}=y")
|
|
||||||
|
|
||||||
# Set flash size with platformio.ini override support
|
|
||||||
# Priority: platformio.ini > board.json manifest
|
|
||||||
flash_size = None
|
|
||||||
if hasattr(env, 'GetProjectOption'):
|
|
||||||
# Check for board_upload.flash_size override in platformio.ini
|
|
||||||
try:
|
|
||||||
flash_size = env.GetProjectOption("board_upload.flash_size", None)
|
|
||||||
except:
|
|
||||||
pass
|
|
||||||
|
|
||||||
# Fallback to board.json manifest
|
|
||||||
if not flash_size:
|
|
||||||
flash_size = board.get("upload", {}).get("flash_size", None)
|
|
||||||
|
|
||||||
if flash_size:
|
|
||||||
# Configure both string and boolean flash size formats
|
|
||||||
# Disable other flash size options first
|
|
||||||
flash_sizes = ["4MB", "8MB", "16MB", "32MB", "64MB", "128MB"]
|
|
||||||
for size in flash_sizes:
|
|
||||||
if size != flash_size:
|
|
||||||
board_config_flags.append(f"# CONFIG_ESPTOOLPY_FLASHSIZE_{size} is not set")
|
|
||||||
|
|
||||||
# Set the specific flash size configs
|
|
||||||
board_config_flags.append(f"CONFIG_ESPTOOLPY_FLASHSIZE=\"{flash_size}\"")
|
|
||||||
board_config_flags.append(f"CONFIG_ESPTOOLPY_FLASHSIZE_{flash_size}=y")
|
|
||||||
|
|
||||||
# Handle Flash and PSRAM frequency configuration with platformio.ini override support
|
|
||||||
# Priority: platformio.ini > board.json manifest
|
|
||||||
# From 80MHz onwards, Flash and PSRAM frequencies must be identical
|
|
||||||
|
|
||||||
# Get f_flash with override support
|
|
||||||
f_flash = None
|
|
||||||
if hasattr(env, 'GetProjectOption'):
|
|
||||||
try:
|
|
||||||
f_flash = env.GetProjectOption("board_build.f_flash", None)
|
|
||||||
except:
|
|
||||||
pass
|
|
||||||
if not f_flash:
|
|
||||||
f_flash = board.get("build.f_flash", None)
|
|
||||||
|
|
||||||
# Get f_boot with override support
|
|
||||||
f_boot = None
|
|
||||||
if hasattr(env, 'GetProjectOption'):
|
|
||||||
try:
|
|
||||||
f_boot = env.GetProjectOption("board_build.f_boot", None)
|
|
||||||
except:
|
|
||||||
pass
|
|
||||||
if not f_boot:
|
|
||||||
f_boot = board.get("build.f_boot", None)
|
|
||||||
|
|
||||||
# Determine the frequencies to use
|
|
||||||
esptool_flash_freq = f_flash # Always use f_flash for esptool compatibility
|
|
||||||
compile_freq = f_boot if f_boot else f_flash # Use f_boot for compile-time if available
|
|
||||||
|
|
||||||
if f_flash and compile_freq:
|
|
||||||
# Ensure frequency compatibility (>= 80MHz must be identical for Flash and PSRAM)
|
|
||||||
compile_freq_val = int(str(compile_freq).replace("000000L", ""))
|
|
||||||
|
|
||||||
if compile_freq_val >= 80:
|
|
||||||
# Above 80MHz, both Flash and PSRAM must use same frequency
|
|
||||||
unified_freq = compile_freq_val
|
|
||||||
flash_freq_str = f"{unified_freq}m"
|
|
||||||
psram_freq_str = str(unified_freq)
|
|
||||||
|
|
||||||
print(f"Info: Unified frequency mode (>= 80MHz): {unified_freq}MHz for both Flash and PSRAM")
|
|
||||||
else:
|
|
||||||
# Below 80MHz, frequencies can differ
|
|
||||||
flash_freq_str = str(compile_freq).replace("000000L", "m")
|
|
||||||
psram_freq_str = str(compile_freq).replace("000000L", "")
|
|
||||||
|
|
||||||
print(f"Info: Independent frequency mode (< 80MHz): Flash={flash_freq_str}, PSRAM={psram_freq_str}")
|
|
||||||
|
|
||||||
# Configure Flash frequency
|
|
||||||
# Disable other flash frequency options first
|
|
||||||
flash_freqs = ["20m", "26m", "40m", "80m", "120m"]
|
|
||||||
for freq in flash_freqs:
|
|
||||||
if freq != flash_freq_str:
|
|
||||||
board_config_flags.append(f"# CONFIG_ESPTOOLPY_FLASHFREQ_{freq.upper()} is not set")
|
|
||||||
# Then set the specific frequency configs
|
|
||||||
board_config_flags.append(f"CONFIG_ESPTOOLPY_FLASHFREQ=\"{flash_freq_str}\"")
|
|
||||||
board_config_flags.append(f"CONFIG_ESPTOOLPY_FLASHFREQ_{flash_freq_str.upper()}=y")
|
|
||||||
|
|
||||||
# Configure PSRAM frequency (same as Flash for >= 80MHz)
|
|
||||||
# Disable other SPIRAM speed options first
|
|
||||||
psram_freqs = ["40", "80", "120"]
|
|
||||||
for freq in psram_freqs:
|
|
||||||
if freq != psram_freq_str:
|
|
||||||
board_config_flags.append(f"# CONFIG_SPIRAM_SPEED_{freq}M is not set")
|
|
||||||
# Then set the specific SPIRAM configs
|
|
||||||
board_config_flags.append(f"CONFIG_SPIRAM_SPEED={psram_freq_str}")
|
|
||||||
board_config_flags.append(f"CONFIG_SPIRAM_SPEED_{psram_freq_str}M=y")
|
|
||||||
|
|
||||||
# Enable experimental features for frequencies > 80MHz
|
|
||||||
if compile_freq_val > 80:
|
|
||||||
board_config_flags.append("CONFIG_IDF_EXPERIMENTAL_FEATURES=y")
|
|
||||||
board_config_flags.append("CONFIG_SPI_FLASH_HPM_ENABLE=y")
|
|
||||||
board_config_flags.append("CONFIG_SPI_FLASH_HPM_AUTO=y")
|
|
||||||
|
|
||||||
# Check for PSRAM support based on board flags
|
|
||||||
extra_flags = board.get("build.extra_flags", [])
|
|
||||||
has_psram = any("-DBOARD_HAS_PSRAM" in flag for flag in extra_flags)
|
|
||||||
|
|
||||||
# Additional PSRAM detection methods
|
|
||||||
if not has_psram:
|
|
||||||
# Check if memory_type contains psram indicators
|
|
||||||
if memory_type and ("opi" in memory_type.lower() or "psram" in memory_type.lower()):
|
|
||||||
has_psram = True
|
|
||||||
# Check build.psram_type
|
|
||||||
elif "psram_type" in board.get("build", {}):
|
|
||||||
has_psram = True
|
|
||||||
# Check for SPIRAM mentions in extra_flags
|
|
||||||
elif any("SPIRAM" in str(flag) for flag in extra_flags):
|
|
||||||
has_psram = True
|
|
||||||
# For ESP32-S3, assume PSRAM capability (can be disabled later if not present)
|
|
||||||
elif mcu == "esp32s3":
|
|
||||||
has_psram = True
|
|
||||||
|
|
||||||
if has_psram:
|
|
||||||
# Enable basic SPIRAM support
|
|
||||||
board_config_flags.append("CONFIG_SPIRAM=y")
|
|
||||||
|
|
||||||
# Determine PSRAM type with platformio.ini override support
|
|
||||||
# Priority: platformio.ini > memory_type > build.psram_type > default
|
|
||||||
psram_type = None
|
|
||||||
|
|
||||||
# Priority 1: Check for platformio.ini override
|
|
||||||
if hasattr(env, 'GetProjectOption'):
|
|
||||||
try:
|
|
||||||
psram_type = env.GetProjectOption("board_build.psram_type", None)
|
|
||||||
if psram_type:
|
|
||||||
psram_type = psram_type.lower()
|
|
||||||
except:
|
|
||||||
pass
|
|
||||||
|
|
||||||
# Priority 2: Check psram_memory_type from memory_type field (e.g., "qio_opi")
|
|
||||||
if not psram_type and psram_memory_type:
|
|
||||||
psram_type = psram_memory_type.lower()
|
|
||||||
# Priority 3: Check build.psram_type field as fallback
|
|
||||||
elif not psram_type and "psram_type" in board.get("build", {}):
|
|
||||||
psram_type = board.get("build.psram_type", "qio").lower()
|
|
||||||
# Priority 4: Default to qio
|
|
||||||
elif not psram_type:
|
|
||||||
psram_type = "qio"
|
|
||||||
|
|
||||||
# Configure PSRAM mode based on detected type
|
|
||||||
if psram_type == "opi":
|
|
||||||
# Octal PSRAM configuration (for ESP32-S3 only)
|
|
||||||
if mcu == "esp32s3":
|
|
||||||
board_config_flags.extend([
|
|
||||||
"CONFIG_IDF_EXPERIMENTAL_FEATURES=y",
|
|
||||||
"# CONFIG_SPIRAM_MODE_QUAD is not set",
|
|
||||||
"CONFIG_SPIRAM_MODE_OCT=y",
|
|
||||||
"CONFIG_SPIRAM_TYPE_AUTO=y"
|
|
||||||
])
|
|
||||||
else:
|
|
||||||
# Fallback to QUAD for non-S3 chips
|
|
||||||
board_config_flags.extend([
|
|
||||||
"# CONFIG_SPIRAM_MODE_OCT is not set",
|
|
||||||
"CONFIG_SPIRAM_MODE_QUAD=y"
|
|
||||||
])
|
|
||||||
|
|
||||||
elif psram_type in ["qio", "qspi"]:
|
|
||||||
# Quad PSRAM configuration
|
|
||||||
if mcu in ["esp32s2", "esp32s3"]:
|
|
||||||
board_config_flags.extend([
|
|
||||||
"# CONFIG_SPIRAM_MODE_OCT is not set",
|
|
||||||
"CONFIG_SPIRAM_MODE_QUAD=y"
|
|
||||||
])
|
|
||||||
elif mcu == "esp32":
|
|
||||||
board_config_flags.extend([
|
|
||||||
"# CONFIG_SPIRAM_MODE_OCT is not set",
|
|
||||||
"# CONFIG_SPIRAM_MODE_QUAD is not set"
|
|
||||||
])
|
|
||||||
|
|
||||||
# Use flash_memory_type for flash config
|
|
||||||
if flash_memory_type and "opi" in flash_memory_type.lower():
|
|
||||||
# OPI Flash configurations require specific settings
|
|
||||||
board_config_flags.extend([
|
|
||||||
"# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set",
|
|
||||||
"# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set",
|
|
||||||
"# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set",
|
|
||||||
"CONFIG_ESPTOOLPY_FLASHMODE_DOUT=y",
|
|
||||||
"CONFIG_ESPTOOLPY_OCT_FLASH=y",
|
|
||||||
"# CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR is not set",
|
|
||||||
"CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_DTR=y"
|
|
||||||
])
|
|
||||||
|
|
||||||
return board_config_flags
|
|
||||||
|
|
||||||
def build_idf_config_flags():
|
def build_idf_config_flags():
|
||||||
"""Build complete IDF configuration flags from all sources."""
|
"""Build complete IDF configuration flags from all sources."""
|
||||||
flags = []
|
flags = []
|
||||||
|
|
||||||
# FIRST: Add board-specific flags derived from board.json manifest
|
# Add board-specific flags first
|
||||||
board_flags = generate_board_specific_config()
|
|
||||||
if board_flags:
|
|
||||||
flags.extend(board_flags)
|
|
||||||
|
|
||||||
# SECOND: Add board-specific flags from board manifest (espidf.custom_sdkconfig)
|
|
||||||
if "espidf.custom_sdkconfig" in board:
|
if "espidf.custom_sdkconfig" in board:
|
||||||
board_manifest_flags = board.get("espidf.custom_sdkconfig", [])
|
board_flags = board.get("espidf.custom_sdkconfig", [])
|
||||||
if board_manifest_flags:
|
if board_flags:
|
||||||
flags.extend(board_manifest_flags)
|
flags.extend(board_flags)
|
||||||
|
|
||||||
# THIRD: Add custom sdkconfig file content
|
# Add custom sdkconfig file content
|
||||||
custom_file_content = load_custom_sdkconfig_file()
|
custom_file_content = load_custom_sdkconfig_file()
|
||||||
if custom_file_content:
|
if custom_file_content:
|
||||||
flags.append(custom_file_content)
|
flags.append(custom_file_content)
|
||||||
|
|
||||||
# FOURTH: Add project-level custom sdkconfig (highest precedence for user overrides)
|
# Add project-level custom sdkconfig
|
||||||
if config.has_option("env:" + env["PIOENV"], "custom_sdkconfig"):
|
if config.has_option("env:" + env["PIOENV"], "custom_sdkconfig"):
|
||||||
custom_flags = env.GetProjectOption("custom_sdkconfig").rstrip("\n")
|
custom_flags = env.GetProjectOption("custom_sdkconfig").rstrip("\n")
|
||||||
if custom_flags:
|
if custom_flags:
|
||||||
flags.append(custom_flags)
|
flags.append(custom_flags)
|
||||||
|
|
||||||
# FIFTH: Apply ESP32-specific compatibility fixes
|
|
||||||
all_flags_str = "\n".join(flags) + "\n" if flags else ""
|
|
||||||
esp32_compatibility_flags = apply_esp32_compatibility_fixes(all_flags_str)
|
|
||||||
if esp32_compatibility_flags:
|
|
||||||
flags.extend(esp32_compatibility_flags)
|
|
||||||
|
|
||||||
return "\n".join(flags) + "\n" if flags else ""
|
return "\n".join(flags) + "\n" if flags else ""
|
||||||
|
|
||||||
def apply_esp32_compatibility_fixes(config_flags_str):
|
def add_flash_configuration(config_flags):
|
||||||
"""Apply ESP32-specific compatibility fixes based on final configuration."""
|
"""Add flash frequency and mode configuration."""
|
||||||
compatibility_flags = []
|
if flash_frequency != "80m":
|
||||||
|
config_flags += "# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set\n"
|
||||||
|
config_flags += f"CONFIG_ESPTOOLPY_FLASHFREQ_{flash_frequency.upper()}=y\n"
|
||||||
|
config_flags += f"CONFIG_ESPTOOLPY_FLASHFREQ=\"{flash_frequency}\"\n"
|
||||||
|
|
||||||
|
if flash_mode != "qio":
|
||||||
|
config_flags += "# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set\n"
|
||||||
|
|
||||||
|
flash_mode_flag = f"CONFIG_ESPTOOLPY_FLASHMODE_{flash_mode.upper()}=y\n"
|
||||||
|
if flash_mode_flag not in config_flags:
|
||||||
|
config_flags += flash_mode_flag
|
||||||
|
|
||||||
# ESP32 specific SPIRAM configuration
|
# ESP32 specific SPIRAM configuration
|
||||||
# On ESP32, SPIRAM is not used with UNICORE mode
|
if mcu == "esp32" and "CONFIG_FREERTOS_UNICORE=y" in config_flags:
|
||||||
if mcu == "esp32" and "CONFIG_FREERTOS_UNICORE=y" in config_flags_str:
|
config_flags += "# CONFIG_SPIRAM is not set\n"
|
||||||
if "CONFIG_SPIRAM=y" in config_flags_str:
|
|
||||||
compatibility_flags.append("# CONFIG_SPIRAM is not set")
|
|
||||||
print("Info: ESP32 SPIRAM disabled since solo1 core mode is enabled")
|
|
||||||
|
|
||||||
return compatibility_flags
|
return config_flags
|
||||||
|
|
||||||
|
|
||||||
def write_sdkconfig_file(idf_config_flags, checksum_source):
|
def write_sdkconfig_file(idf_config_flags, checksum_source):
|
||||||
if "arduino" not in env.subst("$PIOFRAMEWORK"):
|
if "arduino" not in env.subst("$PIOFRAMEWORK"):
|
||||||
@@ -643,9 +346,7 @@ def HandleArduinoIDFsettings(env):
|
|||||||
dst.write(f"# TASMOTA__{checksum}\n")
|
dst.write(f"# TASMOTA__{checksum}\n")
|
||||||
|
|
||||||
# Process each line from source sdkconfig
|
# Process each line from source sdkconfig
|
||||||
src_lines = src.readlines()
|
for line in src:
|
||||||
|
|
||||||
for line in src_lines:
|
|
||||||
flag_name = extract_flag_name(line)
|
flag_name = extract_flag_name(line)
|
||||||
|
|
||||||
if flag_name is None:
|
if flag_name is None:
|
||||||
@@ -674,25 +375,20 @@ def HandleArduinoIDFsettings(env):
|
|||||||
print(f"Add: {cleaned_flag}")
|
print(f"Add: {cleaned_flag}")
|
||||||
dst.write(cleaned_flag + "\n")
|
dst.write(cleaned_flag + "\n")
|
||||||
|
|
||||||
|
|
||||||
# Main execution logic
|
# Main execution logic
|
||||||
has_custom_config = (
|
has_custom_config = (
|
||||||
config.has_option("env:" + env["PIOENV"], "custom_sdkconfig") or
|
config.has_option("env:" + env["PIOENV"], "custom_sdkconfig") or
|
||||||
"espidf.custom_sdkconfig" in board
|
"espidf.custom_sdkconfig" in board
|
||||||
)
|
)
|
||||||
|
|
||||||
has_board_config = has_board_specific_config()
|
if not has_custom_config:
|
||||||
|
|
||||||
if not has_custom_config and not has_board_config:
|
|
||||||
return
|
return
|
||||||
|
|
||||||
if has_board_config and not has_custom_config:
|
print("*** Add \"custom_sdkconfig\" settings to IDF sdkconfig.defaults ***")
|
||||||
print("*** Apply board-specific settings to IDF sdkconfig.defaults ***")
|
|
||||||
else:
|
|
||||||
print("*** Add \"custom_sdkconfig\" settings to IDF sdkconfig.defaults ***")
|
|
||||||
|
|
||||||
# Build complete configuration
|
# Build complete configuration
|
||||||
idf_config_flags = build_idf_config_flags()
|
idf_config_flags = build_idf_config_flags()
|
||||||
|
idf_config_flags = add_flash_configuration(idf_config_flags)
|
||||||
|
|
||||||
# Convert to list for processing
|
# Convert to list for processing
|
||||||
idf_config_list = [line for line in idf_config_flags.splitlines() if line.strip()]
|
idf_config_list = [line for line in idf_config_flags.splitlines() if line.strip()]
|
||||||
|
|||||||
Reference in New Issue
Block a user