Our existing detection doesn't work on Windows, because we canoncalize
the interpreter path but not `info.sys_executable`, so the former
includes the UNC prefix, etc. This is cross-platform and gets at the
intent of the check.
## Summary
When we unzip wheels in the cache, we write the directories out to an
`archive-v0` bucket, and then symlink into that bucket from the
`wheels-v0` and `built-wheels-v0` buckets.
On Windows, symlinks are not well supported. Specifically, they need to
be explicitly enabled by the user. So, instead of symlinks, we now use
junctions, which are well-supported on Windows, and allow you to
(effectively) symlink a directory to another directory. This PR
implements said junction support, which gets the core installer working
on Windows.
In the past, we also used symlinks to implement another primitive: we
wanted to be able to replace a directory "atomically" (I put
"atomically" in quotes because I don't know if it's actually a
guaranteed atomic operation), in case someone was trying to use the
directory while we were replacing it (as opposed to deleting the
directory, then moving it into place).
On Windows, it doesn't appear to be possible to atomically replace a
junction. So instead, I'm using a new design, whereby the cache always
returns canonicalized paths. We know these canonicalized paths are
unique and won't be replaced, so they're safe for writers to rely on. In
general, when we write new data to the cache, we now return the
canonicalized path. When we read from the cache, and try to identify
(e.g.) the set of wheels available to us, we canonicalize the links
immediately and consider them non-existent if that operation fails.
Closes#1085.
---------
Co-authored-by: konstin <konstin@mailbox.org>
Requires https://github.com/zanieb/pubgrub/pull/20
In short, `UnusableDependencies` can be generalized into `Unavailable`
which encompasses incompatibilities where a package range which is
unusable for some inherent reason as well as when its dependencies are
unusable. We can eventually use this to track more incompatibilities in
the solver. I made the reason string required because I can't see a case
where we should leave it out.
Additionally, this improves the display of conflicts in the root
requirements.
This PR replaces a few uses of hash maps/sets with btree maps/sets and
index maps/sets. This has the benefit of guaranteeing a deterministic
order of iteration.
I made these changes as part of looking into a flaky test.
Unfortunately, I'm not optimistic that anything here will actually fix
the flaky test, since I don't believe anything was actually dependent
on the order of iteration.
## Summary
This is a refactor of the source distribution cache that again aims to
make the cache purely additive. Instead of deleting all built wheels
when the cache gets invalidated (e.g., because the source distribution
changed on PyPI or something), we now treat each invalidation as its own
cache directory. The manifest inside of the source distribution
directory now becomes a pointer to the "latest" version of the source
distribution cache.
Here's a visual example:
With this change, we avoid deleting built distributions that might be
relied on elsewhere and maintain our invariant that the cache is purely
additive. The cost is that we now preserve stale wheels, but we should
add a garbage collection mechanism to deal with that.
Missing piece for the release.
## Test Plan
Built the image locally:
```shell
❯ docker run 99956098e1f8f04e209dcfc4a0afcee67df1fe8a726c164884e67f035b1a0f42
Usage: puffin [OPTIONS] <COMMAND>
Commands:
pip Resolve and install Python packages
venv Create a virtual environment
clean Clear the cache
help Print this message or the help of the given subcommand(s)
Options:
-q, --quiet Do not print any output
-v, --verbose Use verbose output
-n, --no-cache Avoid reading from or writing to the cache
--cache-dir <CACHE_DIR> Path to the cache directory [env: PUFFIN_CACHE_DIR=]
-h, --help Print help
-V, --version Print version
```
## Summary
This PR adds a release workflow powered by `cargo-dist`. It's similar to
the version that's PR'd in Ruff
(https://github.com/astral-sh/ruff/pull/9559), with the exception that
it doesn't include the Docker build or the "update dependents" step for
pre-commit.
## Summary
I'm unable to run `puffin-cli` on `main` as the
`tracing-durations-export` is marked as optional, but the crate actually
depends on it to compile. Further, without `tracing-durations-export`,
there are `Option` types that can't resolve to a concrete type.
This PR fixes compilation with and without the feature.
In the past, I moved us to `owo-colors`
(https://github.com/astral-sh/puffin/pull/121); then, we moved back,
because we ran into issues with overriding the settings to force-disable
colors. But `anstream` solved those problems, so I'm moving us _back_ to
`owo-colors`, since it's what `anstream` recommends, and it's already
used by many of our dependencies (`miette`, `configparser`).
---------
Co-authored-by: konstin <konstin@mailbox.org>
Adds support for a `PUFFIN_NO_WRAP` environment variable which disables
line wrapping in `miette` output.
We set this variable in the scenario tests to improve the readability of
snapshots.
I contributed the ability to disable line wrapping upstream at
https://github.com/zkat/miette/pull/328
I don't have a good testing strategy here (I'm manually testing against
`devpi` via `packse`), but the HTML index uses (e.g.)
`data-requires-python=">=3.8"`, so we need to decode.
Easier than i expected: We simply never construct the pubgrub error
variants since we have our own main loop. The `unreachable!()`s can be
removed when never is stabilized
This gives a 1.23 speedup on transformers-extras. We could change to
msgpack for the entire cache if we want. I only tried this format and
postcard so far, where postcard was much slower (like 1.6s).
I don't actually want to merge it like this, i wanted to figure out the
ballpark of improvement for switching away from json.
```
hyperfine --warmup 3 --runs 10 "target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in" "target/profiling/branch pip-compile scripts/requirements/transformers-extras.in"
Benchmark 1: target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in
Time (mean ± σ): 179.1 ms ± 4.8 ms [User: 157.5 ms, System: 48.1 ms]
Range (min … max): 174.9 ms … 188.1 ms 10 runs
Benchmark 2: target/profiling/branch pip-compile scripts/requirements/transformers-extras.in
Time (mean ± σ): 221.1 ms ± 6.7 ms [User: 208.1 ms, System: 46.5 ms]
Range (min … max): 213.5 ms … 235.5 ms 10 runs
Summary
target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in ran
1.23 ± 0.05 times faster than target/profiling/branch pip-compile scripts/requirements/transformers-extras.in
```
Disadvantage: We can't manually look into the cache anymore to debug
things
- [ ] Check more formats, i currently only tested json, msgpack and
postcard, there should be other formats, too
- [x] Switch over `CachedByTimestamp` serialization (for the interpreter
caching)
- [x] Switch over error handling and make sure puffin is still resilient
to cache failure
Uses https://github.com/pubgrub-rs/pubgrub/pull/156 to consolidate
version ranges in error reports using the actual available versions for
each package.
Alternative to https://github.com/zanieb/pubgrub/pull/8 which implements
this behavior as a method in the `Reporter` — here it's implemented in
our custom report formatter (#521) instead which requires no upstream
changes.
Requires https://github.com/zanieb/pubgrub/pull/11 to only retrieve the
versions for packages that will be used in the report.
This is a work in progress. Some things to do:
- ~We may want to allow lazy retrieval of the version maps from the
formatter~
- [x] We should probably create a separate error type for no solution
instead of mixing them with other resolve errors
- ~We can probably do something smarter than creating vectors to hold
the versions~
- [x] This degrades error messages when a single version is not
available, we'll need to special case that
- [x] It seems safer to coerce the error type in `resolve` instead of
`solve` if feasible
Parse `-e` for editable installs in `requirements.txt`.
Unlike all the other requirements, editable installs don't have the name
of the package specified.
## Summary
Even if this will typically be in the user's application folder (rather
than a local directory), it's still a good practice.
Closes https://github.com/astral-sh/puffin/issues/280.
Previously, when installing a package we would delete the target
directory before copying (or linking) the contents of the package.
However, this means that we do not properly support namespace packages
which can share a target directory. Instead the last package to be
installed would be override existing packages. Since we install packages
in parallel, this could result in a race condition where the target
directory already exists which is not allowed when using `clonefile`.
See example error in #515.
https://github.com/astral-sh/puffin/pull/516/commits/c7e63d2dcebab6aa37427c58a9db7603db546a4f
provides a regression test for this — it fails on `main`.
Here, we implement a recursive merge when the target directory already
exists. Both packages will be installed into the same directory. We no
longer delete the target directory, which seems okay since we uninstall
packages before installing now.
When files conflict, we will likely throw an error still. The correct
behavior to implement in this case is unclear, as if we just take "first
write wins" or "last write wins" we could end up with some files from
one package and some from another resulting in two broken packages. A
possible solution here is to lock the target directories while copying.
Replaces the usage of `http-cache-reqwest` for simple index queries with
our custom cached client, removing `http-cache-reqwest` altogether.
The new cache paths are `<cache>/simple-v0/<index>/<package_name>.json`.
I could not test with a non-pypi index since i'm not aware of any other
json indices (jax and torch are both html indices).
In a future step, we can transform the response to be a
`HashMap<Version, {source_dists: Vec<(SourceDistFilename, File)>,
wheels: Vec<(WheeFilename, File)>}` (independent of python version, this
cache is used by all environments together). This should speed up cache
deserialization a bit, since we don't need to try source dist and wheel
anymore and drop incompatible dists, and it should make building the
`VersionMap` simpler. We can speed this up even further by splitting
into a version lists and the info for each version. I'm mentioning this
because deserialization was a major bottleneck in the rust part of the
old python prototype.
Fixes#481
Extends #424 with support for URL dependency incompatibilities.
Requires changes to `miette` to prevent URLs from being word wrapped;
accepted upstream in https://github.com/zkat/miette/pull/321
Addresses
https://github.com/astral-sh/puffin/issues/309#issuecomment-1792648969
Similar to #338 this throws an error when merging versions results in an
empty set. Instead of propagating that error, we capture it and return a
new dependency type of `Unusable`. Unusable dependencies are a new
incompatibility kind which includes an arbitrary "reason" string that we
present to the user. Adding a new incompatibility kind requires changes
to the vendored pubgrub crate.
We could use this same incompatibility kind for conflicting urls as in
#284 which should allow the solver to backtrack to another valid version
instead of failing (see #425).
Unlike #383 this does not require changes to PubGrub's package mapping
model. I think in the long run we'll want PubGrub to accept multiple
versions per package to solve this specific issue, but we're interested
in it being merged upstream first. This pull request is just using the
issue as a simple case to explore adding a new incompatibility type.
We may or may not be able convince them to add this new incompatibility
type upstream. As discussed in
https://github.com/pubgrub-rs/pubgrub/issues/152, we may want a more
general incompatibility kind instead which can be used for arbitrary
problems. An upstream pull request has been opened for discussion at
https://github.com/pubgrub-rs/pubgrub/pull/153.
Related to:
- https://github.com/pubgrub-rs/pubgrub/issues/152
- #338
- #383
---------
Co-authored-by: konsti <konstin@mailbox.org>
A fork will let us stay up to date with the upstream while replaying our
work on top of it.
I expect a similar workflow to the RustPython-Parser fork we maintained,
except that I wrote an automation to create tags for each commit on the
fork (https://github.com/zanieb/pubgrub/pull/2) so we do not need to
manually tag and document each commit.
To update with the upstream:
- Rebase our fork's `main` branch on top of the latest changes in
upstream's `dev` branch
- Force push, overwriting our `main` branch history
- Change the commit hash here to the last commit on `main` in our fork
Since we automatically tag each commit on the fork, we should never lose
the commits that are dropped from `main` during rebase.
Charlie Marsh