## Summary
This PR just adds the logic in `install-wheel-rs` to write
`direct_url.json`. We're not actually taking advantage of it yet (or
wiring it through) in Puffin.
Part of https://github.com/astral-sh/puffin/issues/332.
Ran `cargo upgrade --incompatible`, seems there are no changes required.
From cacache 0.12.0:
> BREAKING CHANGE: some signatures for copy have changed, and copy no
longer automatically reflinks
`which` 5.0.0 seems to have only error message changes.
## Summary
This is a first-pass at adding source distribution support to the
installer.
The previous installation flow was:
1. Come up with a plan.
1. Find a distribution (specific file) for every package that we'll need
to download.
1. Download those distributions.
1. Unzip them (since we assumed they were all wheels).
1. Install them into the virtual environment.
Now, Step (3) downloads both wheels and source distributions, and we
insert a step between Steps (3) and (4) to build any source
distributions into zipped wheels.
There are a bunch of TODOs, the most important (IMO) is that we
basically have two implementations of downloading and building, between
the stuff in `puffin_installer` and `puffin_resolver` (namely in
`crates/puffin-resolver/src/distribution`). I didn't attempt to clean
that up here -- it's already a problem, and it's related to the overall
problem we need to solve around unified caching and resource management.
Closes#243.
This PR adds a mechanism by which we can ensure that we _always_ try to
refresh Git dependencies when resolving; further, we now write the fully
resolved SHA to the "lockfile". However, nothing in the code _assumes_
we do this, so the installer will remain agnostic to this behavior.
The specific approach taken here is minimally invasive. Specifically,
when we try to fetch a source distribution, we check if it's a Git
dependency; if it is, we fetch, and return the exact SHA, which we then
map back to a new URL. In the resolver, we keep track of URL
"redirects", and then we use the redirect (1) for the actual source
distribution building, and (2) when writing back out to the lockfile. As
such, none of the types outside of the resolver change at all, since
we're just mapping `RemoteDistribution` to `RemoteDistribution`, but
swapping out the internal URLs.
There are some inefficiencies here since, e.g., we do the Git fetch,
send back the "precise" URL, then a moment later, do a Git checkout of
that URL (which will be _mostly_ a no-op -- since we have a full SHA, we
don't have to fetch anything, but we _do_ check back on disk to see if
the SHA is still checked out). A more efficient approach would be to
return the path to the checked-out revision when we do this conversion
to a "precise" URL, since we'd then only interact with the Git repo
exactly once. But this runs the risk that the checked-out SHA changes
between the time we make the "precise" URL and the time we build the
source distribution.
Closes#286.
## Summary
This PR adds support for Git dependencies, like:
```
flask @ git+https://github.com/pallets/flask.git
```
Right now, they're only supported in the resolver (and not the
installer), since the installer doesn't yet support source distributions
at all.
The general approach here is based on Cargo's Git implementation.
Specifically, I adapted Cargo's
[`git`](https://github.com/rust-lang/cargo/blob/23eb492cf920ce051abfc56bbaf838514dc8365c/src/cargo/sources/git/mod.rs)
module to perform the cloning, which is based on `libgit2`.
As compared to Cargo's implementation, I made the following changes:
- Removed any unnecessary code.
- Fixed any Clippy errors for our stricter ruleset.
- Removed the dependency on `curl`, in favor of `reqwest` which we use
elsewhere.
- Removed the ability to use `gix`. Cargo allows the use of `gix` as an
experimental flag, but it only supports a small subset of the
operations. When Cargo fully adopts `gix`, we should plan to do the
same.
- Removed Cargo's host key checking. We need to re-add this! I'll do it
shortly.
- Removed Cargo's progress bars. We should re-add this too, but we use
`indicatif` and Cargo had their own thing.
There are a few follow-ups to consider:
- Adding support in the installer.
- When we lock, we should write out the Git URL that includes the exact
SHA. This lets us cache in perpetuity and avoids dependencies changing
without re-locking.
- When we resolve, we should _always_ try to refresh Git dependencies.
(Right now, we skip if the wheel was already built.)
I'll work on the latter two in follow-up PRs.
Closes#202.
The normalized name abstractions were not consistently, this PR uses
them where they were previously missing:
* `WheelFilename::distribution`
* `Requirement::name`
* `Requirement::extras`
* `Metadata21::name`
* `Metadata21::provides_dist`
With `puffin-package` depending on `pep508_rs` this would be cyclical
crate dependency, so `puffin-normalize` gets split out from
`puffin-package`.
`DistInfoName` has the same task and semantics as `PackageName`, so it's
merged into the latter.
`PackageName` and `ExtraName` documentation is moved onto the type and
their constructors are called `new` instead of `normalize`. We now use
these constructors rarely enough the implicit allocation by
`to_string()` shouldn't matter anymore, while more actual cloning
becomes visible.
## Summary
This PR adds support for resolving and installing dependencies via
direct URLs, like:
```
werkzeug @ https://files.pythonhosted.org/packages/ff/1d/960bb4017c68674a1cb099534840f18d3def3ce44aed12b5ed8b78e0153e/Werkzeug-2.0.0-py3-none-any.whl
```
These are fairly common (e.g., with `torch`), but you most often see
them as Git dependencies.
Broadly, structs like `RemoteDistribution` and friends are now enums
that can represent either registry-based dependencies or URL-based
dependencies:
```rust
/// A built distribution (wheel) that exists as a remote file (e.g., on `PyPI`).
#[derive(Debug, Clone)]
#[allow(clippy::large_enum_variant)]
pub enum RemoteDistribution {
/// The distribution exists in a registry, like `PyPI`.
Registry(PackageName, Version, File),
/// The distribution exists at an arbitrary URL.
Url(PackageName, Url),
}
```
In the resolver, we now allow packages to take on an extra, optional
`Url` field:
```rust
#[derive(Debug, Clone, Eq, Derivative)]
#[derivative(PartialEq, Hash)]
pub enum PubGrubPackage {
Root,
Package(
PackageName,
Option<DistInfoName>,
#[derivative(PartialEq = "ignore")]
#[derivative(PartialOrd = "ignore")]
#[derivative(Hash = "ignore")]
Option<Url>,
),
}
```
However, for the purpose of version satisfaction, we ignore the URL.
This allows for the URL dependency to satisfy the transitive request in
cases like:
```
flask==3.0.0
werkzeug @ https://files.pythonhosted.org/packages/c3/fc/254c3e9b5feb89ff5b9076a23218dafbc99c96ac5941e900b71206e6313b/werkzeug-3.0.1-py3-none-any.whl
```
There are a couple limitations in the current approach:
- The caching for remote URLs is done separately in the resolver vs. the
installer. I decided not to sweat this too much... We need to figure out
caching holistically.
- We don't support any sort of time-based cache for remote URLs -- they
just exist forever. This will be a problem for URL dependencies, where
we need some way to evict and refresh them. But I've deferred it for
now.
- I think I need to redo how this is modeled in the resolver, because
right now, we don't detect a variety of invalid cases, e.g., providing
two different URLs for a dependency, asking for a URL dependency and a
_different version_ of the same dependency in the list of first-party
dependencies, etc.
- (We don't yet support VCS dependencies.)
This also allows us to get rid of `PinnedPackage` _and_ to remove some
`Result<...>` types due to needless conversions between
otherwise-identical types.
musl (which we already use in ruff) allows statically linked binaries on
linux. This PR switches to rustls and vendors and fixes the glibc
detection. Using static musl builds makes it easier to avoid glibc
errors in docker and we'll need it later for alpine users anyway.
An alternative is using vendored openssl.
To check to top 1k (current state):
```bash
scripts/resolve/get_pypi_top_8k.sh
cargo run --bin puffin-dev -- resolve-many scripts/resolve/pypi_top_8k_flat.txt --limit 1000
```
Results:
```
Errors: pywin32, geoip2, maxminddb, pypika, dirac
Success: 995, Error: 5
```
pywin32 has no solution for the build environment, 3 have no
`[build-system]` entry in pyproject.toml, `dirac` is missing cmake
Currently, this is only the source distribution building feature moved.
It's intended that we can add development and test commands there
without affecting the main cli surface
Previously, we had two python interpreter metadata structs, one in
gourgeist and one in puffin. Both would spawn a subprocess to query
overlapping metadata and both would appear in the cli crate, if you
weren't careful you could even have to different base interpreters at
once. This change unifies this to one set of metadata, queried and
cached once.
Another effect of this crate is proper separation of python interpreter
and venv. A base interpreter (such as `/usr/bin/python/`, but also pyenv
and conda installed python) has a set of metadata. A venv has a root and
inherits the base python metadata except for `sys.prefix`, which unlike
`sys.base_prefix`, gets set to the venv root. From the root and the
interpreter info we can compute the paths inside the venv. We can reuse
the interpreter info of the base interpreter when creating a venv
without having to query the newly created `python`.
This is isn't ready, but it can resolve
`meine_stadt_transparent==0.2.14`.
The source distributions are currently being built serially one after
the other, i don't know if that is incidentally due to the resolution
order, because sdist building is blocking or because of something in the
resolver that could be improved.
It's a bit annoying that the thing that was supposed to do http requests
now suddenly also has to a whole download/unpack/resolve/install/build
routine, it messes up the type hierarchy. The much bigger problem though
is avoid recursive crate dependencies, it's the reason for the callback
and for splitting the builder into two crates (badly named atm)
Allows the user to select between clone, hardlink, and copy semantics
for installs. (The pnpm documentation has a decent description of what
these mean: https://pnpm.io/npmrc#package-import-method.)
Closes#159.
Borrows terminology from pnpm by introducing three resolution modes:
- "Highest": always choose the highest compliant version (default).
- "Lowest": always choose the lowest compliant version.
- "LowestDirect": choose the lowest compliant version of direct
dependencies, and the highest compliant version of any transitive
dependencies. (This makes a bit more sense than "lowest".)
Closes https://github.com/astral-sh/puffin/issues/142.
The need for this became clear when working on the source distribution
integration into the resolver.
While at it i also switch the `WheelFilename` version to the parsed
`pep440_rs` version now that we have this crate.
Builds up a complete resolved graph from PubGrub, and shows the sources
that led to each package being included in the resolution, like
`pip-compile`.
Closes https://github.com/astral-sh/puffin/issues/60.
Updates to `29c48fb9f3daa11bd02794edd55060d0b01ee705` from the
`pubgrub-rs` dev branch. This lets us reduce the number of changes we've
made to PubGrub itself (now, only changing visibility to export a few
things from the `solver.rs` module).
Gets rid of the custom `DistInfo` struct in the site-packages
abstraction in favor of a new kind of distribution
(`InstalledDistribution`). No change in behavior.
This is also a lot faster. Unfortunately it copies a lot of code from
the sync cli since the `Printer` is private.
The first commit are some refactorings i made when i thought about how i
could reuse the existing code.
This needs far better error handling and user-facing feedback, but it
does the basic operation (and includes discovery of the `pyproject.toml`
file, etc.).
This adds a basic sdist builder that has been tested with two source
distributions, one with a PEP 517 backend and one with setup.py.
It uses pip for requirements installation atm, lacks testing in all
directions, lacks checks for recursive requirements, can't pass in
already resolved versions, doesn't support prepare metadata for build to
allow resolution to continue without doing the actual (native) build,
error messages are mediocre, etc.
```console
$ RUST_LOG=puffin_build=debug puffin-build --wheels wheels downloads/tqdm-4.66.1.tar.gz
2023-10-16T12:28:35.503182Z DEBUG build_sdist{path="downloads/tqdm-4.66.1.tar.gz" base_python="/usr/bin/python3"}: puffin_build: Building downloads/tqdm-4.66.1.tar.gz
2023-10-16T12:28:35.521780Z INFO build_sdist{path="downloads/tqdm-4.66.1.tar.gz" base_python="/usr/bin/python3"}:extract_archive: puffin_build: close time.busy=18.4ms time.idle=16.7µs
2023-10-16T12:28:35.845096Z DEBUG build_sdist{path="downloads/tqdm-4.66.1.tar.gz" base_python="/usr/bin/python3"}:resolve_and_install: puffin_build: Calling pip to install build dependencies
2023-10-16T12:28:37.668660Z INFO build_sdist{path="downloads/tqdm-4.66.1.tar.gz" base_python="/usr/bin/python3"}:resolve_and_install: puffin_build: close time.busy=1.82s time.idle=13.2µs
2023-10-16T12:28:37.668744Z DEBUG build_sdist{path="downloads/tqdm-4.66.1.tar.gz" base_python="/usr/bin/python3"}: puffin_build: Calling `setuptools.build_meta.get_requires_for_build_wheel()`
2023-10-16T12:28:38.159205Z INFO build_sdist{path="downloads/tqdm-4.66.1.tar.gz" base_python="/usr/bin/python3"}:run_python_script{python_interpreter="/tmp/.tmpm4cTra/venv/bin/python"}: puffin_build: close time.busy=490ms time.idle=13.0µs
2023-10-16T12:28:38.159304Z DEBUG build_sdist{path="downloads/tqdm-4.66.1.tar.gz" base_python="/usr/bin/python3"}: puffin_build: Calling `setuptools.build_meta.build_wheel()`
2023-10-16T12:28:38.501732Z INFO build_sdist{path="downloads/tqdm-4.66.1.tar.gz" base_python="/usr/bin/python3"}:run_python_script{python_interpreter="/tmp/.tmpm4cTra/venv/bin/python"}: puffin_build: close time.busy=342ms time.idle=15.2µs
2023-10-16T12:28:38.522700Z INFO build_sdist{path="downloads/tqdm-4.66.1.tar.gz" base_python="/usr/bin/python3"}: puffin_build: close time.busy=3.02s time.idle=16.2µs
Wheel built to /home/konsti/projects/puffin/crates/puffin-build/wheels/tqdm-4.66.1-py3-none-any.whl
2023-10-16T12:28:38.522772Z DEBUG puffin_build: Took 3020ms
$ puffin-build --wheels wheels downloads/geoextract-0.3.1.tar.gz
2023-10-16T12:28:40.884622Z DEBUG build_sdist{path="downloads/geoextract-0.3.1.tar.gz" base_python="/usr/bin/python3"}: puffin_build: Building downloads/geoextract-0.3.1.tar.gz
2023-10-16T12:28:40.887743Z INFO build_sdist{path="downloads/geoextract-0.3.1.tar.gz" base_python="/usr/bin/python3"}:extract_archive: puffin_build: close time.busy=2.97ms time.idle=12.6µs
2023-10-16T12:28:41.469738Z INFO build_sdist{path="downloads/geoextract-0.3.1.tar.gz" base_python="/usr/bin/python3"}: puffin_build: close time.busy=585ms time.idle=15.3µs
Wheel built to /home/konsti/projects/puffin/crates/puffin-build/wheels/geoextract-0.3.1-py3-none-any.whl
2023-10-16T12:28:41.469814Z DEBUG puffin_build: Took 585ms
```
## Summary
This PR enables the proof-of-concept resolver to backtrack by way of
using the `pubgrub-rs` crate.
Rather than using PubGrub as a _framework_ (implementing the
`DependencyProvider` trait, letting PubGrub call us), I've instead
copied over PubGrub's primary solver hook (which is only ~100 lines or
so) and modified it for our purposes (e.g., made it async).
There's a lot to improve here, but it's a start that will let us
understand PubGrub's appropriateness for this problem space. A few
observations:
- In simple cases, the resolver is slower than our current (naive)
resolver. I think it's just that the pipelining isn't as efficient as in
the naive case, where we can just stream package and version fetches
concurrently without any bottlenecks.
- A lot of the code here relates to bridging PubGrub with our own
abstractions -- so we need a `PubGrubPackage`, a `PubGrubVersion`, etc.
We can always restore these from history, but right now, it feels a lot
more productive to just hit PyPI directly for our integration tests,
since we don't have to spend time figuring out mocks.
Remove the parser I wrote in favor of Konsti's which is much more
complete. The only change vs. the version in `poc-monotrail` is that I
changed the tests to use insta rather than manually storing and
comparing against JSON snapshots.
Closes https://github.com/astral-sh/puffin/issues/89.
Mocks out the PyPI client using some checked-in fixtures. The test is
very basic, and I'm not very happy with all the ceremony around the
mocks and such, but it's an interesting experiment at least.
When we go to install a locked `requirements.txt`, if a wheel is already
available in the local cache, and matches the version specifiers, we can
just use it directly without fetching the package metadata. This speeds
up the no-op case by about 33%.
Closes https://github.com/astral-sh/puffin/issues/48.
Charlie Marsh