This gives a 1.23 speedup on transformers-extras. We could change to
msgpack for the entire cache if we want. I only tried this format and
postcard so far, where postcard was much slower (like 1.6s).
I don't actually want to merge it like this, i wanted to figure out the
ballpark of improvement for switching away from json.
```
hyperfine --warmup 3 --runs 10 "target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in" "target/profiling/branch pip-compile scripts/requirements/transformers-extras.in"
Benchmark 1: target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in
Time (mean ± σ): 179.1 ms ± 4.8 ms [User: 157.5 ms, System: 48.1 ms]
Range (min … max): 174.9 ms … 188.1 ms 10 runs
Benchmark 2: target/profiling/branch pip-compile scripts/requirements/transformers-extras.in
Time (mean ± σ): 221.1 ms ± 6.7 ms [User: 208.1 ms, System: 46.5 ms]
Range (min … max): 213.5 ms … 235.5 ms 10 runs
Summary
target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in ran
1.23 ± 0.05 times faster than target/profiling/branch pip-compile scripts/requirements/transformers-extras.in
```
Disadvantage: We can't manually look into the cache anymore to debug
things
- [ ] Check more formats, i currently only tested json, msgpack and
postcard, there should be other formats, too
- [x] Switch over `CachedByTimestamp` serialization (for the interpreter
caching)
- [x] Switch over error handling and make sure puffin is still resilient
to cache failure
Two low-hanging fruits as optimizations for version parsing: A fast path
for release only versions and removing the regex from version specifiers
(still calling into version's parsing regex if required). This enables
optimizing the serde format since we now see the serde part instead of
only PEP 440 parsing. I intentionally didn't rewrite the full PEP 440 at
this step.
```console
$ hyperfine --warmup 5 --runs 50 "target/profiling/puffin pip-compile scripts/requirements/transformers-extras.in" "target/profiling/main pip-compile scripts/requirements/transformers-extras.in"
Benchmark 1: target/profiling/puffin pip-compile scripts/requirements/transformers-extras.in
Time (mean ± σ): 217.1 ms ± 3.2 ms [User: 194.0 ms, System: 55.1 ms]
Range (min … max): 211.0 ms … 228.1 ms 50 runs
Benchmark 2: target/profiling/main pip-compile scripts/requirements/transformers-extras.in
Time (mean ± σ): 276.7 ms ± 5.7 ms [User: 252.4 ms, System: 54.6 ms]
Range (min … max): 268.9 ms … 303.5 ms 50 runs
Summary
target/profiling/puffin pip-compile scripts/requirements/transformers-extras.in ran
1.27 ± 0.03 times faster than target/profiling/main pip-compile scripts/requirements/transformers-extras.in
```
---------
Co-authored-by: Andrew Gallant <andrew@astral.sh>
## Summary
This PR ensures that we re-use the resolution to install the build
dependencies when building a source distribution. Currently, we only
pass along the list of requirements, and then use the `Finder` to map
each requirement to a distribution. But we already determine the correct
distribution when resolving!
Closes https://github.com/astral-sh/puffin/issues/655.
## Summary
This PR adds a `VerbatimUrl` struct to preserve verbatim URLs throughout
the resolution and installation pipeline. In short, alongside the parsed
`Url`, we also keep the URL as written by the user. This enables us to
display the URL exactly as written by the user, rather than the
serialized path that we use internally.
This will be especially useful once we start expanding environment
variables since, at that point, we'll be able to write the version of
the URL that includes the _unexpected_ environment variable to the
output file.
We have some shared utilities beyond `puffin-build` and
`puffin-distribution`, and further, I want to be able to access the
sdist archive extraction logic from `puffin-distribution`. This is
really generic, so moving into its own crate.
## Summary
Now, `puffin_warnings::warn_once` and `puffin_warnings::warn` will go to
`stderr`, as long as the user isn't running under `--quiet`. Previously,
these went through `tracing`, and so were only visible when running
under `--verbose`.
Uses https://github.com/pubgrub-rs/pubgrub/pull/156 to consolidate
version ranges in error reports using the actual available versions for
each package.
Alternative to https://github.com/zanieb/pubgrub/pull/8 which implements
this behavior as a method in the `Reporter` — here it's implemented in
our custom report formatter (#521) instead which requires no upstream
changes.
Requires https://github.com/zanieb/pubgrub/pull/11 to only retrieve the
versions for packages that will be used in the report.
This is a work in progress. Some things to do:
- ~We may want to allow lazy retrieval of the version maps from the
formatter~
- [x] We should probably create a separate error type for no solution
instead of mixing them with other resolve errors
- ~We can probably do something smarter than creating vectors to hold
the versions~
- [x] This degrades error messages when a single version is not
available, we'll need to special case that
- [x] It seems safer to coerce the error type in `resolve` instead of
`solve` if feasible
## Summary
At present, we have two separate phases within the installation pipeline
related to populating wheels into the cache. The first phase downloads
the distribution, and then builds any source distributions into wheels;
the second phase unzips all the built wheels into the cache.
This PR merges those two phases into one, such that we seamlessly
download, build, and unzip wheels in one pass. This is more efficient,
since we can start unzipping while we build. It also ensures that if the
install _fails_ partway through, we don't end up with a bunch of
downloaded wheels that we never had a chance to unzip. The code is also
much simpler.
The main downside is that the user-facing feedback isn't as granular,
since we only have one phase and one progress bar for what was
originally three distinct phases.
Closes https://github.com/astral-sh/puffin/issues/571.
## Test Plan
I ran the benchmark script on two separate requirements files, and saw a
7% and 31% speedup respectively:
```text
+ TARGET=./scripts/benchmarks/requirements.txt
+ hyperfine --runs 100 --warmup 10 --prepare 'virtualenv --clear .venv' './target/release/main pip-sync ./scripts/benchmarks/requirements.txt --no-cache' --prepare 'virtualenv --clear .venv' './target/release/puffin pip-sync ./scripts/benchmarks/requirements.txt --no-cache'
Benchmark 1: ./target/release/main pip-sync ./scripts/benchmarks/requirements.txt --no-cache
Time (mean ± σ): 269.4 ms ± 33.0 ms [User: 42.4 ms, System: 117.5 ms]
Range (min … max): 221.7 ms … 446.7 ms 100 runs
Benchmark 2: ./target/release/puffin pip-sync ./scripts/benchmarks/requirements.txt --no-cache
Time (mean ± σ): 250.6 ms ± 28.3 ms [User: 41.5 ms, System: 127.4 ms]
Range (min … max): 207.6 ms … 336.4 ms 100 runs
Summary
'./target/release/puffin pip-sync ./scripts/benchmarks/requirements.txt --no-cache' ran
1.07 ± 0.18 times faster than './target/release/main pip-sync ./scripts/benchmarks/requirements.txt --no-cache'
```
```text
+ TARGET=./scripts/benchmarks/requirements-large.txt
+ hyperfine --runs 100 --warmup 10 --prepare 'virtualenv --clear .venv' './target/release/main pip-sync ./scripts/benchmarks/requirements-large.txt --no-cache' --prepare 'virtualenv --clear .venv' './target/release/puffin pip-sync ./scripts/benchmarks/requirements-large.txt --no-cache'
Benchmark 1: ./target/release/main pip-sync ./scripts/benchmarks/requirements-large.txt --no-cache
Time (mean ± σ): 5.053 s ± 0.354 s [User: 1.413 s, System: 6.710 s]
Range (min … max): 4.584 s … 6.333 s 100 runs
Benchmark 2: ./target/release/puffin pip-sync ./scripts/benchmarks/requirements-large.txt --no-cache
Time (mean ± σ): 3.845 s ± 0.225 s [User: 1.364 s, System: 6.970 s]
Range (min … max): 3.482 s … 4.715 s 100 runs
Summary
'./target/release/puffin pip-sync ./scripts/benchmarks/requirements-large.txt --no-cache' ran
```
I saw warnings when we were e.g. unzipping wheel and setuptools in two
tasks at the same time. We now keep track of in flight unzips.
This introduces a `OnceMap` abstraction which we also use in the
resolver.
## Summary
This PR enables `puffin clean` to accept package names as command line
arguments, and selectively purge entries from the cache tied to the
given package.
Relate to #572.
## Test Plan
Modified all the caching tests to run an additional step to (1) purge
the cache, and (2) re-install the package.
Extends #517 with a suggestion from @konstin to parse the `SimpleJson`
into an intermediate type `SimpleMetadata(BTreeMap<Version,
VersionFiles>)` before converting to a `VersionMap`. This reduces the
number of times we need to parse the response. Additionally, we cache
the parsed response now instead of `SimpleJson`.
`VersionFiles` stores two vectors with
`WheelFilename`/`SourceDistFilename` and `File` tuples. These can be
iterated over together or separately. A new enum `DistFilename` was
added to capture the `SourceDistFilename` and `WheelFilename` variants
allowing iteration over both vectors.
This PR adds caching support for built wheels in the installer.
Specifically, the `RegistryWheelIndex` now indexes both downloaded and
built wheels (from registries), and we have a new `BuiltWheelIndex` that
takes a subdirectory and returns the "best-matching" compatible wheel.
Closes#570.
Parse `-e` for editable installs in `requirements.txt`.
Unlike all the other requirements, editable installs don't have the name
of the package specified.
Path distribution cache reading errors are no longer fatal.
We now invalidate the path file source dists if its modification
timestamp changed, and invalidate path dir source dists if
`pyproject.toml` or alternatively `setup.py` changed, which seems good
choices since changing pyproject.toml should trigger a rebuild and the
user can `touch` the file as part of their workflow.
`CachedByTimestamp` is now a shared util. It doesn't have methods as i
don't think it's worth it yet for two users.
Closes#478
TODO(konstin): Write a test. This is probably twice as much work as that
fix itself, so i made that PR without one for now.
## Summary
When installing a local wheel, we need to avoid removing the zipped
wheel (since it lives outside of the cache), _and_ need to ensure that
we unzip the wheel into the cache (rather than replacing the zipped
wheel, which may even live outside of the project).
Closes https://github.com/astral-sh/puffin/issues/553.
This PR modifies the source distribution building to replace any
existing targets after building the new wheel. In some cases, the
existence of an existing target may be indicative of a bug, so we warn.
It's partially a workaround for some (but not all) of the errors in
https://github.com/astral-sh/puffin/issues/554.
## Summary
Even if this will typically be in the user's application folder (rather
than a local directory), it's still a good practice.
Closes https://github.com/astral-sh/puffin/issues/280.
After this change, two wheel caches remain: `built-wheels-v0` and
`wheels-v0`, docs screenshots below. Each contains both the wheel
metadata, cache policy and zip or unzipped wheels under the same name.
The zipped/unzipped strategy is as follows: In `pip-compile`, when we
build a wheel, we store it zipped. When `pip-sync` or a source dist
build in `pip-compile` need to install the wheel, we unzip it, remove
the file and replace it with the unzipped wheel.
This removes `WheelCache` and `UrlIndex` in favor of `Cache` plus
`WheelCache`. The non-built wheel cache now considers index urls and the
url for url wheels.
I'm unsure if we need the `Unzipper` type, this could just be a
function.
I move `no_index` into `IndexUrls` and started using `IndexUrl` up to
the clap level.
I left a number of TODOs in the code, namely performing the actual
invalidation of unzipped wheels and making the `InstallPlan` understand
cache invalidation (i.e. uninstall wheels when their remote changed).
Previously, when installing a package we would delete the target
directory before copying (or linking) the contents of the package.
However, this means that we do not properly support namespace packages
which can share a target directory. Instead the last package to be
installed would be override existing packages. Since we install packages
in parallel, this could result in a race condition where the target
directory already exists which is not allowed when using `clonefile`.
See example error in #515.
https://github.com/astral-sh/puffin/pull/516/commits/c7e63d2dcebab6aa37427c58a9db7603db546a4f
provides a regression test for this — it fails on `main`.
Here, we implement a recursive merge when the target directory already
exists. Both packages will be installed into the same directory. We no
longer delete the target directory, which seems okay since we uninstall
packages before installing now.
When files conflict, we will likely throw an error still. The correct
behavior to implement in this case is unclear, as if we just take "first
write wins" or "last write wins" we could end up with some files from
one package and some from another resulting in two broken packages. A
possible solution here is to lock the target directories while copying.
This is mostly a mechanical refactor that moves 80% of our code to the
same cache abstraction.
It introduces cache `Cache`, which abstracts away the path of the cache
and the temp dir drop and is passed throughout the codebase. To get a
specific cache bucket, you need to requests your `CacheBucket` from
`Cache`. `CacheBucket` is the centralizes the names of all cache
buckets, moving them away from the string constants spread throughout
the crates.
Specifically for working with the `CachedClient`, there is a
`CacheEntry`. I'm not sure yet if that is a strict improvement over
`cache_dir: PathBuf, cache_file: String`, i may have to rotate that
later.
The interpreter cache moved into `interpreter-v0`.
We can use the `CacheBucket` page to document the cache structure in
each bucket:
Replaces the usage of `http-cache-reqwest` for simple index queries with
our custom cached client, removing `http-cache-reqwest` altogether.
The new cache paths are `<cache>/simple-v0/<index>/<package_name>.json`.
I could not test with a non-pypi index since i'm not aware of any other
json indices (jax and torch are both html indices).
In a future step, we can transform the response to be a
`HashMap<Version, {source_dists: Vec<(SourceDistFilename, File)>,
wheels: Vec<(WheeFilename, File)>}` (independent of python version, this
cache is used by all environments together). This should speed up cache
deserialization a bit, since we don't need to try source dist and wheel
anymore and drop incompatible dists, and it should make building the
`VersionMap` simpler. We can speed this up even further by splitting
into a version lists and the info for each version. I'm mentioning this
because deserialization was a major bottleneck in the rust part of the
old python prototype.
Fixes#481
## Summary and motivation
For a given source dist, we store the metadata of each wheel built
through it in `built-wheel-metadata-v0/pypi/<source dist
filename>/metadata.json`. During resolution, we check the cache status
of the source dist. If it is fresh, we check `metadata.json` for a
matching wheel. If there is one we use that metadata, if there isn't, we
build one. If the source is stale, we build a wheel and override
`metadata.json` with that single wheel. This PR thereby ties the local
built wheel metadata cache to the freshness of the remote source dist.
This functionality is available through `SourceDistCachedBuilder`.
`puffin_installer::Builder`, `puffin_installer::Downloader` and
`Fetcher` are removed, instead there are now `FetchAndBuild` which calls
into the also new `SourceDistCachedBuilder`. `FetchAndBuild` is the new
main high-level abstraction: It spawns parallel fetching/building, for
wheel metadata it calls into the registry client, for wheel files it
fetches them, for source dists it calls `SourceDistCachedBuilder`. It
handles locks around builds, and newly added also inter-process file
locking for git operations.
Fetching and building source distributions now happens in parallel in
`pip-sync`, i.e. we don't have to wait for the largest wheel to be
downloaded to start building source distributions.
In a follow-up PR, I'll also clear built wheels when they've become
stale.
Another effect is that in a fully cached resolution, we need neither zip
reading nor email parsing.
Closes#473
## Source dist cache structure
Entries by supported sources:
* `<build wheel metadata cache>/pypi/foo-1.0.0.zip/metadata.json`
* `<build wheel metadata
cache>/<sha256(index-url)>/foo-1.0.0.zip/metadata.json`
* `<build wheel metadata
cache>/url/<sha256(url)>/foo-1.0.0.zip/metadata.json`
But the url filename does not need to be a valid source dist filename
(<https://github.com/search?q=path%3A**%2Frequirements.txt+master.zip&type=code>),
so it could also be the following and we have to take any string as
filename:
* `<build wheel metadata
cache>/url/<sha256(url)>/master.zip/metadata.json`
Example:
```text
# git source dist
pydantic-extra-types @ git+https://github.com/pydantic/pydantic-extra-types.git
# pypi source dist
django_allauth==0.51.0
# url source dist
werkzeug @ https://files.pythonhosted.org/packages/0d/cc/ff1904eb5eb4b455e442834dabf9427331ac0fa02853bf83db817a7dd53d/werkzeug-3.0.1.tar.gz
```
will be stored as
```text
built-wheel-metadata-v0
├── git
│ └── 5c56bc1c58c34c11
│ └── 843b753e9e8cb74e83cac55598719b39a4d5ef1f
│ └── metadata.json
├── pypi
│ └── django-allauth-0.51.0.tar.gz
│ └── metadata.json
└── url
└── 6781bd6440ae72c2
└── werkzeug-3.0.1.tar.gz
└── metadata.json
```
The inside of a `metadata.json`:
```json
{
"data": {
"django_allauth-0.51.0-py3-none-any.whl": {
"metadata-version": "2.1",
"name": "django-allauth",
"version": "0.51.0",
...
}
}
}
```
## Summary
This PR adds support for local path dependencies. The approach mostly
just falls out of our existing approach and infrastructure for Git and
URL dependencies.
Closes https://github.com/astral-sh/puffin/issues/436. (We'll open a
separate issue for editable installs.)
## Test Plan
Added `pip-compile` tests that pre-download a wheel or source
distribution, then install it via local path.
## Summary
A variety of small refactors to the distribution types crate to (1)
return `Result` if we find an invalid wheel, rather than treating it as
a source distribution with a `.whl` suffix, and (2) DRY up some repeated
code around URLs.
A consistent cache structure for remote wheel metadata:
* `<wheel metadata cache>/pypi/foo-1.0.0-py3-none-any.json`
* `<wheel metadata
cache>/<digest(index-url)>/foo-1.0.0-py3-none-any.json`
* `<wheel metadata cache>/url/<digest(url)>/foo-1.0.0-py3-none-any.json`
The source dist caching will use a similar structure (#468).
Deduplicate lenient parsing code between version specifiers and
Requirement. Use `warn_once!` since the warnings did show up multiple
times in my code. Fix the macro hygiene in `warn_once!`.
## Summary
This PR unifies the behavior that lived in the resolver's `distribution`
crates with the behaviors that were spread between the various structs
in the installer crate into a single `Fetcher` struct that is intended
to manage all interactions with distributions. Specifically, the
interface of this struct is such that it can access distribution
metadata, download distributions, return those downloads, etc., all with
a common cache.
Overall, this is mostly just DRYing up code that was repeated between
the two crates, and putting it behind a reasonable shared interface.
## Summary
This crate only contains types, and I want to introduce a new crate for
all _operations_ on distributions, so this feels like a more natural
name given we also have `pypi-types`.
Previously, git requirements would fail when setting `--cache-dir`:
```console
$ cargo run --bin puffin -- pip-compile --cache-dir cache-all-kinds scripts/benchmarks/requirements/all-kinds.in
error: Failed to build distribution from URL: git+https://github.com/pydantic/pydantic-extra-types.git
Caused by: Invalid path URL: cache-all-kinds/git-v0/db/b49ffcfeb6c2e9d8
```
The cause is using a relative and not an absolute path, which `Url` needs, the solution is to turn the cache dir into an absolute path.
This never showed up in the tests since the tests use absolute temp dirs for everything.
Extends #424 with support for URL dependency incompatibilities.
Requires changes to `miette` to prevent URLs from being word wrapped;
accepted upstream in https://github.com/zkat/miette/pull/321
Always¹ clear the temporary directories we create.
* Clear source dist downloads: Previously, the temporary directories
would remain in the cache dir, now they are cleared properly
* Clear wheel file downloads: Delete the `.whl` file, we only need to
cache the unpacked wheel
* Consistent handling of cache arguments: Abstract the handling for CLI
cache args away, again making sure we remove the `--no-cache` temp dir.
There are no more `into_path()` calls that persist `TempDir`s that i
could find.
¹Assuming drop is run, and deleting the directory doesn't silently
error.
konsti