pioduino/esp-idf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

added notes on where to change XTAL freq

Browse Source 
Merges https://github.com/espressif/esp-idf/pull/1458
This commit is contained in:
Greg Herlein
2018-01-01 08:13:39 -08:00
committed by Angus Gratton
parent c401a74bfb
commit a834c069f1
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/get-started/index.rst
+1 -1
View File
@@ -285,7 +285,7 @@ To exit the monitor use shortcut ``Ctrl+]``.
e���)(Xn@�y.!��(�PW+)��Hn9a؅/9�!�t5��P�~�k��e�ea�5�jA
~zY��Y(1�,1�� e���)(Xn@�y.!Dr�zY(�jpi�|�+z5Ymvp
or monitor fails shortly after upload, your board is likely using 26MHz crystal, while the ESP-IDF assumes default of 40MHz. Exit the monitor, go back to the :ref:`menuconfig <get-started-configure>`, change :ref:`CONFIG_ESP32_XTAL_FREQ_SEL` to 26MHz, then :ref:`build and flash <get-started-build-flash>` the application again.
or monitor fails shortly after upload, your board is likely using 26MHz crystal, while the ESP-IDF assumes default of 40MHz. Exit the monitor, go back to the :ref:`menuconfig <get-started-configure>`, change :ref:`CONFIG_ESP32_XTAL_FREQ_SEL` to 26MHz, then :ref:`build and flash <get-started-build-flash>` the application again. This is found under ``make menuconfig`` under Component config --> ESP32-specific --> Main XTAL frequency.
To execute ``make flash`` and ``make monitor`` in one go, type ``make flash monitor``. Check section :doc:`IDF Monitor <idf-monitor>` for handy shortcuts and more details on using this application.