3.3.7

variants/fobe_quill_esp32s3_mesh/pins_arduino.h

@@ -0,0 +1,108 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define USB_VID          0x303A
+#define USB_PID          0x82F4
+#define USB_MANUFACTURER "FoBE Studio"
+#define USB_PRODUCT      "FoBE Quill ESP32S3 Mesh"
+#define USB_SERIAL       ""  // Empty string for MAC address
+
+// User LED
+#define LED_BUILTIN 11
+#define BUILTIN_LED LED_BUILTIN  // backward compatibility
+
+/*
+ * Battery
+ */
+#define PIN_VBAT     (10)
+#define BAT_VOLT_PIN PIN_VBAT
+
+/*
+ * Buttons
+ */
+#define PIN_BUTTON1 (0)
+
+/*
+ * Serial interfaces
+ */
+static const uint8_t TX = 9;
+static const uint8_t RX = 8;
+
+/*
+ * Wire Interfaces
+ */
+static const uint8_t SDA = 14;
+static const uint8_t SCL = 13;
+
+/*
+ * SPI interfaces
+ */
+static const uint8_t SS = 45;
+static const uint8_t MOSI = 39;
+static const uint8_t SCK = 40;
+static const uint8_t MISO = 41;
+
+/*
+ * Screen
+ */
+#define PIN_OLED_SDA (14)
+#define PIN_OLED_SCL (13)
+#define PIN_OLED_EN  (12)
+
+/*
+ * LoRa
+ */
+#define PIN_SX126X_NSS   (45)
+#define PIN_SX126X_DIO1  (42)
+#define PIN_SX126X_BUSY  (43)
+#define PIN_SX126X_RESET (44)
+#define PIN_SX126X_TXEN  (-1)
+#define PIN_SX126X_RXEN  (46)
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+/*
+ * MFP
+ */
+#define PIN_MFP1 (38)
+#define PIN_MFP2 (37)
+#define PIN_MFP3 (36)
+#define PIN_MFP4 (35)
+
+/*
+ * Power
+ */
+#define PIN_PERI_EN (1)
+
+/*
+ * PINs
+ */
+static const uint8_t A0 = 2;
+static const uint8_t A1 = 3;
+static const uint8_t A2 = 4;
+static const uint8_t A3 = 5;
+static const uint8_t A4 = 6;
+static const uint8_t A5 = 7;
+static const uint8_t D0 = 8;
+static const uint8_t D1 = 9;
+static const uint8_t D2 = 11;
+static const uint8_t D3 = 38;
+static const uint8_t D4 = 37;
+static const uint8_t D5 = 36;
+static const uint8_t D6 = 35;
+static const uint8_t D7 = 34;
+static const uint8_t D8 = 33;
+static const uint8_t D9 = 47;
+static const uint8_t D10 = 48;
+static const uint8_t D11 = 21;
+static const uint8_t D12 = 18;
+static const uint8_t D13 = 17;
+static const uint8_t MTCK = 39;
+static const uint8_t MTDO = 40;
+static const uint8_t MTDI = 41;
+static const uint8_t MTMS = 42;
+
+#endif /* Pins_Arduino_h */

variants/fobe_quill_esp32s3_mesh/variant.cpp

@@ -0,0 +1,15 @@
+#include "esp32-hal-gpio.h"
+#include "pins_arduino.h"
+
+extern "C" {
+
+void initVariant(void) {
+  // Turn on the peripheral power
+  pinMode(PIN_PERI_EN, OUTPUT);
+  digitalWrite(PIN_PERI_EN, HIGH);
+
+  // Turn on the OLED power
+  pinMode(PIN_OLED_EN, OUTPUT);
+  digitalWrite(PIN_OLED_EN, LOW);
+}
+}