3.3.7

variants/heltec_capsule_sensor_v3/partitions.csv

@@ -0,0 +1,10 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x009000, 0x005000,
+otadata,  data, ota,     0x00e000, 0x002000,
+app,      app,  ota_0,   0x010000, 0x250000,
+flashApp, app,  ota_1,   0x260000, 0x0A0000,
+spiffs,   data, spiffs,  0x300000, 0x100000,
+factory,  app,  factory, 0x400000, 0x100000,
+secondApp,app,  ota_2,   0x500000, 0x2D0000,
+key_data, 0x40, 0x00,    0x7D0000, 0x020000,
+coredump, data, coredump,0x7F0000,0x10000,

variants/heltec_capsule_sensor_v3/pins_arduino.h

@@ -0,0 +1,86 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define HELTEC_CAPSULE_SENSOR_V3 true
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// Some boards have too low voltage on this pin (board design bug)
+// Use different pin with 3V and connect with 48
+// and change this setup for the chosen pin (for example 38)
+static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + 48;
+#define BUILTIN_LED    LED_BUILTIN  // backward compatibility
+#define LED_BUILTIN    LED_BUILTIN
+#define RGB_BUILTIN    LED_BUILTIN
+#define RGB_BRIGHTNESS 64
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 41;
+static const uint8_t SCL = 42;
+
+static const uint8_t SS = 8;
+static const uint8_t MOSI = 10;
+static const uint8_t MISO = 11;
+static const uint8_t SCK = 9;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+static const uint8_t Vext = 21;
+static const uint8_t LED0 = 33;
+static const uint8_t LED1 = 34;
+static const uint8_t USER_BUTTON = 18;
+
+static const uint8_t GPS_RX_PIN = 5;
+static const uint8_t GPS_TX_PIN = 4;
+static const uint8_t GPS_RESET_PIN = 3;
+static const uint8_t GPS_PPS_PIN = 1;
+
+static const uint8_t ADC_BATTERY_PIN = 7;
+#define BAT_VOLT_PIN ADC_BATTERY_PIN
+static const uint8_t ADC_BATTERY_CTRL_PIN = 36;
+
+static const uint8_t RST_LoRa = 12;
+static const uint8_t BUSY_LoRa = 13;
+static const uint8_t DIO0 = 14;
+
+#endif /* Pins_Arduino_h */