3.3.7

variants/um_tinys3/partitions_tinyuf2.csv

@@ -0,0 +1,10 @@
+# ESP-IDF Partition Table
+# Name,   Type, SubType, Offset,  Size, Flags
+# bootloader.bin,,          0x1000, 32K
+# partition table,,         0x8000, 4K
+nvs,      data, nvs,      0x9000,  20K,
+otadata,  data, ota,      0xe000,  8K,
+ota_0,    0,    ota_0,   0x10000,  2048K,
+ota_1,    0,    ota_1,  0x210000,  2048K,
+uf2,      app,  factory,0x410000,  256K,
+ffat,     data, fat,    0x450000,  3776K,

variants/um_tinys3/pins_arduino.h

@@ -0,0 +1,61 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define USB_VID          0x303A
+#define USB_PID          0x80D0
+#define USB_MANUFACTURER "Unexpected Maker"
+#define USB_PRODUCT      "TinyS3"
+#define USB_SERIAL       ""
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 9;
+
+static const uint8_t SS = 34;
+static const uint8_t MOSI = 35;
+static const uint8_t MISO = 37;
+static const uint8_t SDO = 35;
+static const uint8_t SDI = 37;
+static const uint8_t SCK = 36;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+
+static const uint8_t VBAT_SENSE = 10;
+#define BAT_VOLT_PIN VBAT_SENSE
+static const uint8_t VBUS_SENSE = 33;
+
+static const uint8_t RGB_DATA = 18;
+// RGB_BUILTIN and RGB_BRIGHTNESS can be used in new Arduino API rgbLedWrite()
+#define RGB_BUILTIN    (RGB_DATA + SOC_GPIO_PIN_COUNT)
+#define RGB_BRIGHTNESS 64
+// BUILTIN_LED can be used in new Arduino API digitalWrite() like in Blink.ino
+static const uint8_t LED_BUILTIN = RGB_BUILTIN;
+#define BUILTIN_LED LED_BUILTIN  // backward compatibility
+#define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN
+
+static const uint8_t RGB_PWR = 17;
+
+#endif /* Pins_Arduino_h */