3.3.7

variants/wt32-sc01-plus/partitions_tinyuf2.csv

@@ -0,0 +1,10 @@
+# ESP-IDF Partition Table
+# Name,   Type, SubType, Offset,  Size, Flags
+# bootloader.bin,,          0x1000, 32K
+# partition table,,         0x8000, 4K
+nvs,      data, nvs,      0x9000,  20K,
+otadata,  data, ota,      0xe000,  8K,
+ota_0,    0,    ota_0,   0x10000,  2048K,
+ota_1,    0,    ota_1,  0x210000,  2048K,
+uf2,      app,  factory,0x410000,  256K,
+ffat,     data, fat,    0x450000,  3776K,

variants/wt32-sc01-plus/pins_arduino.h

@@ -0,0 +1,64 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+/**
+ * Variant: WT32-SC01 PLUS
+ * Vendor: Wireless-Tag
+ * Url: http://www.wireless-tag.com/portfolio/wt32-eth01/
+ */
+
+#include <stdint.h>
+
+#define USB_VID          0x303A
+#define USB_PID          0x80D0
+#define USB_MANUFACTURER "PANLEE"
+#define USB_PRODUCT      "SC01PLUS"
+#define USB_SERIAL       ""
+//GENERAL I/O
+static const uint8_t BOOT_0 = 0;
+static const uint8_t IO1 = 10;
+static const uint8_t IO2 = 11;
+static const uint8_t IO3 = 12;
+static const uint8_t IO4 = 13;
+static const uint8_t IO5 = 14;
+static const uint8_t IO6 = 21;
+//RS485
+static const uint8_t TX = 42;
+static const uint8_t RX = 1;
+static const uint8_t RTS = 2;
+//TOUCHSCREEN
+static const uint8_t BL_PWM = 45;    //BACKLIGHT PWM
+static const uint8_t LCD_RESET = 4;  //LCD RESET, MULTIPLEXED WITH TOUCH RESET
+static const uint8_t LCD_RS = 0;     //COMMAND/DATA
+static const uint8_t LCD_WR = 47;    //WRITE CLOCK
+static const uint8_t LCD_TE = 48;    //FRAME SYNC
+static const uint8_t LCD_DB0 = 9;
+static const uint8_t LCD_DB1 = 46;
+static const uint8_t LCD_DB2 = 3;
+static const uint8_t LCD_DB3 = 8;
+static const uint8_t LCD_DB4 = 18;
+static const uint8_t LCD_DB5 = 17;
+static const uint8_t LCD_DB6 = 16;
+static const uint8_t LCD_DB7 = 15;
+
+//SPEAKER
+static const uint8_t LRCK = 35;
+static const uint8_t BCLK = 36;
+static const uint8_t DOUT = 37;
+
+//TOUCHSCREEN DIGITIZER
+static const uint8_t TP_INT = 7;
+static const uint8_t SDA = 6;
+static const uint8_t SCL = 5;
+static const uint8_t RST = 4;
+//MICRO SD CARD
+static const uint8_t SD_CS = 41;
+static const uint8_t SD_DI = 40;  //MOSI
+static const uint8_t SD_DO = 38;  //MISO
+static const uint8_t SD_CLK = 39;
+static const uint8_t SS = 41;
+static const uint8_t MOSI = 40;
+static const uint8_t MISO = 38;
+static const uint8_t SCK = 39;
+
+#endif /* Pins_Arduino_h */