Update Zigbee_On_Off_Light.ino

examples/arduino-zigbee-light/src/Zigbee_On_Off_Light.ino

@@ -45,6 +45,10 @@ void setLED(bool value) {
 
 /********************* Arduino functions **************************/
 void setup() {
+  Serial.begin(115200);
+  while (!Serial) {
+    delay(10);
+  }
   // Init LED and turn it OFF (if LED_PIN == RGB_BUILTIN, the rgbLedWrite() will be used under the hood)
   pinMode(LED_PIN, OUTPUT);
   digitalWrite(LED_PIN, LOW);
@@ -59,12 +63,21 @@ void setup() {
   zbLight.onLightChange(setLED);
 
   //Add endpoint to Zigbee Core
-  log_d("Adding ZigbeeLight endpoint to Zigbee Core");
+  Serial.println("Adding ZigbeeLight endpoint to Zigbee Core");
   Zigbee.addEndpoint(&zbLight);
 
   // When all EPs are registered, start Zigbee. By default acts as ZIGBEE_END_DEVICE
-  log_d("Calling Zigbee.begin()");
-  Zigbee.begin();
+  if (!Zigbee.begin()) {
+    Serial.println("Zigbee failed to start!");
+    Serial.println("Rebooting...");
+    ESP.restart();
+  }
+  Serial.println("Connecting to network");
+  while (!Zigbee.connected()) {
+    Serial.print(".");
+    delay(100);
+  }
+  Serial.println();
 }
 
 void loop() {
@@ -77,10 +90,13 @@ void loop() {
       delay(50);
       if ((millis() - startTime) > 3000) {
         // If key pressed for more than 3secs, factory reset Zigbee and reboot
-        Serial.printf("Resetting Zigbee to factory settings, reboot.\n");
+        Serial.println("Resetting Zigbee to factory and rebooting in 1s.");
+        delay(1000);
         Zigbee.factoryReset();
       }
     }
+    // Toggle light by pressing the button
+    zbLight.setLight(!zbLight.getLightState());
   }
   delay(100);
 }